MA10
Mazda ReferenceMA000
z To perform this Mode 4 EVAP drive cycle:
1. Verify that all electrical loads (headlights, blower, rear window defroster, and A/C) are off.
2. Verify that all the sensors listed in the table below are within specification:
Figure MA000-14
3. Start the engine and race it at 3500 RPM to warm up completely.
4. Drive vehicle as indicated by the graph (Figure MA000-15).
Table MA000-1
MODEL YEAR
BARO
in-Hg (mm-Hg/kPa)
IAT
°F (°C)
FUEL TANK LEVEL
% or VOLTS
ECT
°F (°C)
626/MX6 1996–97 21.3 (540/72.0)
14 to 131
(-10 to 55)
15 to 85%
14 to 90.5
(-10 to 30)
Millenia
1996–98 21.3 (540/72.0)
50 to 140
(10 to 60)
15 to 85%
32 to 95
(0 to 35)
1999–2002 21.3 (540/72.0)
50 to 140
(10 to 60)
15 to 85%
14 to X†
(-10 to X†)
Miata
1996–99 21.3 (540/72.0)
50 to 140
(10 to 60)
15 to 85%
32 to 95
(0 to 35)
2000–03 21.3 (540/72.0)
14 to 140
(-10 to 60)
0.24 to 2.0 V
14 to 90.5
(-10 to 30)
MPV 2000–01 21.3 (540/72.0)
50 to 140
(10 to 60)
0.5 to 2.5 V
32 to 95
(0 to 35)
Protege
1996–98 21.3 (540/72.0)
50 to 140
(10 to 60)
15 to 85%
32 to 95
(0 to 35)
1999–2003 21.3 (540/72.0)
50 to 140
(10 to 60)
15 to 85%
14 to X†
(-10 to X†)
† Value X is determined by ECT/BARO relationship as shown in the graph (Figure MA000-14)
Comments to this Manuals