Mazda 2004 Tribute Specifications download pdf (Page 95)

WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE

REPLACED if the seat belt assembly “automatic locking

retractor” feature or any other seat belt function is not

operating properly when checked according to the procedures in

Workshop Manual.

WARNING: Failure to replace the Belt and Retractor assembly

could increase the risk of injury in collisions.

Front safety belt height adjustment

Adjust the height of the shoulder

belt so the belt rests across the

middle of your shoulder.

To adjust the shoulder belt height,

push the button and slide the height

adjuster up or down. Release the

button and pull down on the height

adjuster to make sure it is locked in

place.

WARNING: Position the safety belt height adjusters so that the

belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the

seat belt and increase the risk of injury in a collision.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

front passenger seating positions.

The safety belt pretensioners are designed to activate during certain

frontal or near-frontal collisions with sufficient longitudinal deceleration.

A safety belt pretensioner is a device which tightens the webbing of the

lap and shoulder belts in such a way that they fit more snugly against

the body.

Seating and Safety Restraints

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 95