Mazda 2004 Tribute Specifications download pdf (Page 59)

Storage compartment (if equipped)

Press the OPEN control to open the

storage compartment. The door will

open slightly and can be moved to

full open.

Installing a garage door opener (if equipped)

The storage compartment can be converted to accommodate a variety of

aftermarket garage door openers:

• Remove the Velcro pad (2) from

the storage compartment door

(3).

• Place Velcro (5) on aftermarket

transmitter (6) opposite of

actuator control (8).

• Measure the thickness (4) of the

aftermarket transmitter (6).

• Remove the rubber actuator (1)

from the storage compartment

(7) by pulling the rubber actuator

(1) forward and twisting at the

same time.

Note: The length of the rubber

actuator (1) is critical. Use care

in cutting it to length. If the rubber

actuator (1) is cut too much the

aftermarket transmitter (6) will not

activate the garage door opener. If

the rubber actuator (1) is cut too

long, the storage compartment door (3) will not close properly.

Excessive force to close the storage compartment door (3) may cause

the door latch to break.

• Per the table below, cut the rubber actuator (1) to the proper length

based on the thickness (4) measured in the third step.

Driver Controls

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 59