Mazda 2004 Tribute Specifications download pdf (Page 154)

Hitches

Do not use hitches that clamp onto the vehicle bumper. Use a load

carrying hitch. You must distribute the load in your trailer so that

10–15% of the total weight of the trailer is on the tongue.

Safety chains

Always connect the trailer’s safety chains to the frame or hook retainers

of the vehicle hitch. To connect the trailer’s safety chains, cross the

chains under the trailer tongue and allow slack for turning corners.

If you use a rental trailer, follow the instructions that the rental agency

gives to you.

Do not attach safety chains to the bumper.

Trailer brakes

Electric brakes and manual, automatic or surge-type trailer brakes are

safe if installed properly and adjusted to the manufacturer’s

specifications. The trailer brakes must meet local and Federal

regulations.

WARNING: Do not connect a trailer’s hydraulic brake system

directly to your vehicle’s brake system. Your vehicle may not

have enough braking power and your chances of having a

collision greatly increase.

The braking system of the tow vehicle is rated for operation at the

GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running

lights, brake lights, turn signals and hazard lights are working. See your

authorized Mazda dealer for proper instructions and equipment for

hooking up trailer lamps.

Driving while you tow

When towing a trailer:

• Turn off the speed control. The speed control may shut off

automatically when you are towing on long, steep grades.

• Consult your local motor vehicle speed regulations for towing a trailer.

• To eliminate excessive shifting, use a lower gear. This will also assist

in transmission cooling.

Driving

154

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 154