Mazda 2004 Tribute Specifications download pdf (Page 72)

The remote entry system allows you

to lock or unlock all vehicle doors

without a key. The remote feature

will only operate when the ignition

is in the 1 (LOCK) or 2 (ACC)

position.

If there is a problem with the

remote entry system make sure to

take ALL remote entry

transmitters with you to the

dealership, this will aid in

troubleshooting the problem.

Unlocking the doors

1. Press and release to unlock the driver’s door. Note: The interior

lamps will illuminate, if the control on the overhead lamp is in the

DOOR position, the flashers will flash twice, and the perimeter alarm

system (if equipped) will deactivate.

2. Press

and release again within three seconds to unlock the

passenger doors, the liftgate and liftgate glass.

The remote entry system activates the illuminated entry feature. This

feature turns on all the interior lamps for 30 seconds or until the ignition

is turned to the RUN position. If the dome lamp control (if equipped) is

in the off position, the illuminated entry feature will not work.

The inside lights will not turn off if:

• they have been turned on using the dome lamp control or

• any door is open.

The battery saver feature will turn off the interior lamps 40 minutes after

the ignition is turned to the OFF position.

Locking the doors

1. Press and release to lock all the doors. The park lamps will flash

once and the perimeter alarm (if equipped) will be start the arming

process. For more information concerning the perimeter alarm, refer

to Perimeter alarm system (if equipped) later in this chapter.

2. Press

and release again within three seconds to confirm that all

the doors are closed and locked.

If any of the doors or the hood are not properly closed the horn will not

sound and the park lamps will not flash.

Locks and Security

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 72