Mazda 2004 Tribute Specifications download pdf (Page 215)

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (an opaque plastic

bottle). Slowly turn cap counterclockwise (left) until pressure begins

to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

5. Fill the coolant reservoir slowly with the proper coolant mixture (see

above), to within the “cold fill range” or the “cold full” level on the

reservoir. If you removed the radiator cap in an overflow system, fill

the radiator until the coolant is visible and radiator is almost full.

6. Replace the cap. Turn until tightly installed. (Cap must be tightly

installed to prevent coolant loss.)

After any coolant has been added, run the engine for a few minutes to

mix the coolant. Check the coolant concentration. Make sure the engine

is off and cool before removing the coolant pressure relief cap (see

preceding steps on cap removal). Check the concentration per the

Checking Engine Coolant section. If the concentration is not 50/50

(protection to –34°F/–36°C), drain some coolant and adjust the

concentraction. It may take several drains and additions to obtain a 50/50

coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

If you have to add more than 1.0 liter (1.0 quart) of engine coolant per

month, have your dealer check the engine cooling system. Your cooling

system may have a leak. Operating an engine with a low level of coolant

can result in engine overheating and possible engine damage).

Recycled engine coolant

Not all coolant recycling processes produce coolant which meets

Mazda recommend coolants. Use of a recycled engine coolant

which does not meet the Mazda recommended coolant, may harm

engine and cooling system components.

Always dispose of used automotive fluids in a responsible manner.

Follow your community’s regulations and standards for recycling and

disposing of automotive fluids.

Maintenance and Specifications

215

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 215