Mazda 2004 Tribute Specifications download pdf (Page 54)

Replacing brake/tail/turn/backup lamps bulbs

The brake/tail/turn/backup lamp bulbs are located in the tail lamp

assembly, one just below the other. Follow the same steps to replace

either bulb:

1. Open the liftgate to expose the

lamp assemblies.

2. Remove the two screws from

the lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward.

4. Twist the bulb socket

counterclockwise and remove

from lamp assembly.

5. Pull the bulb straight out of the

socket and push in the new

bulb.

6. To complete installation, follow

the removal procedure in

reverse order.

Replacing front parking/turn signal lamp bulbs

1. Make sure that the headlamp control is in the OFF position.

2. Open the hood. The position lamps are located on the bottom half of

each headlamp.

3. Disconnect the electrical connector from the bulb by pulling

rearward.

4. Remove the bulb socket from the lamp assembly by turning

counterclockwise.

Lights

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 255 256

No comments

Mazda 2004 Tribute Specifications Page 54