Mazda 0000-8F-N02B Owner's Manual download pdf (Page 4)

4280159 Rev. A 10/10

VEHICLE PREPARATION; continued

b. Remove the driver’s side kick panel by removing the plas-

tic nut. (FIGURE C) Partially peel back the rubber

weatherstrip away from the kick panel. Insert a fiber stick

between the body and kick panel to disengage the re-

taining clip. Gently pull the kick panel toward the

passenger’s side of the vehicle to remove.

c. Remove the black, lower dash panel by using a fiber stick

to pull the plastic center button of both plastic fasteners

out to disengage. Use a fiber stick to disengage the single

clip located at the front, center of the panel and remove.

(FIGURE D)

d. Smart-Key equipped vehicles only - Remove the ignition

knob by depressing both buttons on either side of knob

and pulling away from ignition switch.

e. Remove the three (3) phillips head screws from the lower

steering column cover. (FIGURE E)

f. Insert a fiber stick between the combination switch and

the lower cover. Gently rotate the fiber stick until top and

bottom covers separate. (FIGURE E)

g. Retractable Key equipped vehicles only - Gently unclip

the ignition key light and remove the lower cover.

FIGURE D

Plastic Nut

Fig. 1-4

Plastic Nut

FIGURE C

FIGURE E

1 2 3 4 5 6 7 8 9 ... 25 26

No comments

Mazda 0000-8F-N02B Owner's Manual Page 4