Mazda 3 2007 Specifications download pdf (Page 317)

Black plate (316,1)

3. Do the following procedure when

replacing the left headlight bulb.

Remove the clip, grasp the attached

area of the slide mount and lift it

upward, and then slide the slide mount

to a position where it does not interfere

with the frame.

Clip

Slide mount

Frame

Attached area

4. Remove the strap and raise the air

filter.

Strap

5. Find the high and low beam bulbs in

the rear of the headlight unit.

The outboard bulb is the LOW beam,

and the inboard one is the HIGH beam.

Refer to Light Bulbs on page 8-40.

High-beam bulb

1. Turn the socket and bulb assembly

counterclockwise and remove it.

Carefully remove the headlight bulb

from its socket in the reflector by

gently pulling it straight backward out

of the socket.

2. Disconnect the bulb from the electrical

connector by pressing the tab on the

connector with your finger and pulling

the bulb upward.

8-42

Maintenance and Care

Owner Maintenance

Mazda3_8V66-EA-06F_Edition2 Page316

Friday, May 26 2006 10:55 AM

Form No.8V66-EA-06F

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 458 459

Comments to this Manuals

No comments