Mazda 3 2007 Specifications download pdf (Page 316)

Black plate (315,1)

WARNING

Do not replace the xenon fusion bulbs

yourself:

Replacing the xenon fusion bulbs

yourself is dangerous. Because the

xenon fusio n bulbs require high

voltage, you could receive an electric

shock if the bulbs are handled

incorrectly. Consult an Authorized

Mazda Dealer when the replacement is

necessary.

Handling Halogen Bulbs:

When a halogen bulb breaks, it is

dangerous. These bulbs contain

pressurized gas. If one is broken, it

will explode and serious injuries could

be caused by the flying glass.

If the glass portion is touched with

bare hands, body oil co uld cause the

bulb to overheat and explode when lit.

Never touch the glass portion of the

bulb with your bare hands and always

wear eye protection when handling or

working around halogen bulbs.

Children and Halogen Bulbs:

Playing with a halogen bulb is

dangerous. Serious injuries could be

caused by dropping a halogen bulb or

breaking it some other way.

Always keep halogen bulbs out of the

reach of children.

qReplacing Exterior Light Bulbs

Replacing a headlight bulb

(Without turbocharger)

1. Make sure the ignition switch is turned

off and the headlight switch is off.

2. Lift the hood.

3. Turn the screws counterclockwise and

remove them and the cover when

replacing the left headlight bulb.

Cover

4. Find the high and low beam bulbs in

the rear of the headlight unit.

The outboard bulb is the LOW beam,

and the inboard one is the HIGH beam.

Refer to Light Bulbs on page 8-40.

(With turbocharger)

1. Make sure the ignition switch is turned

off and the headlight switch is off.

2. Lift the hood.

Maintenance and Care

Owner Maintenance

8-41

Mazda3_8V66-EA-06F_Edition2 Page315

Friday, May 26 2006 10:55 AM

Form No.8V66-EA-06F

1 2 ... 311 312 313 314 315 316 317 318 319 320 321 ... 458 459

Comments to this Manuals

No comments