Mazda 3 2007 Specifications download pdf (Page 271)

Black plate (270,1)

Discharged

battery

Jumper cables

Connect cables in numerical order and disconnect in reverse order.

Booster battery

1. Remove the battery cover from its front

side.

Battery cover

2. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

3. If the boost er battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electrical loads in both

vehicles.

4. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to a solid,

stationary, exposed metallic point

(for example, the right hand side

engine mounting bolt) away from

the discharged battery (4).

5. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

6. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

7-18

In Case of an Emergency

Emergency Starting

Mazda3_8V66-EA-06F_Edition2 Page270

Friday, May 26 2006 10:55 AM

Form No.8V66-EA-06F

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 458 459

Comments to this Manuals

No comments