Mazda CX-7 Owner's Manual download pdf (Page 91)

Black plate (91,1)

NOTE

l

When switching the ignition to OFF/LOCK,

the ignition switch has to be pushed in from

the ACC position and turned. Without being

pushed in, the ignition switch stops at the

ACC position and the vehicle battery may

be discharged if the ignition switch is left in

the ACC position. When leaving the vehicle,

make sure the ignition is switched to OFF/

LOCK.

l

If the vehicle is left with the ignition not

switched to OFF/LOCK, a beep sound is

heard and the indicator light flashes to

notify the driver.

Refer to Warning Beep (page 3-18).

Operation Using Advanced

Key Functions

qKeyless Entry System

This system uses the more traditional

keyless entry buttons to remotely lock and

unlock the doors and the liftgate.

It can also help you signal for attention.

Press the buttons slowly and carefully.

NOTE

l

The keyless entry system is designed to

operate up to about 2.5 m (8 ft) from the

center of the vehicle, but this may vary due

to local conditions.

l

The system does not operate when the

auxiliary key is in the ignition switch.

l

With the start knob installed in the OFF/

LOCK position, the system is fully

operational. If the ignition is not switched

off or the start knob is pushed in, the system

does not operate.

l

All doors and the liftgate cannot be locked

by pressing the lock button while any door

or the liftgate is open. The hazard warning

lights will also not flash.

l

If the transmitter does not operate when

pressing a button or the operational range

becomes too small, the battery may be

dead. To install a new battery, refer to

Maintenance (page 3-5).

Knowing Your Mazda

Advanced Keyless Entry and Start System

3-13

CX-7_8CG3-EA-11J_Edition1 Page91

Saturday, September 24 2011 10:31 AM

Form No.8CG3-EA-11J

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 521 522

Comments to this Manuals

No comments