Mazda CX-7 Owner's Manual download pdf (Page 456)

Black plate (456,1)

NOTE

l

Because genuine leather is a natural

material, its surface is not uniform and it

may have natural scars, scratches, and

wrinkles.

l

To maintain the quality for as long as

possible, periodical maintenance, about

twice a year, is recommended.

l

Sand and dust on the seat surface may

damage the overcoat of the genuine leather

surfaces and accelerate wear.

l

Greasy soiling on genuine leather may

cause molding and stains.

l

Rubbing hard with a stiff brush or cloth

may cause damage.

l

Do not wipe the leather using alcohol,

chlorine bleach, or organic solvents such as

thinner, benzene, or gasoline. Otherwise, it

may cause discoloration or stains.

l

If the seats get wet, promptly remove

moisture with a dry cloth. Remaining

moisture on the surface may cause

deterioration such as hardening and

shrinkage.

l

Exposure to direct sunlight for long periods

may cause deterioration and shrinkage.

When parking the car under direct sunlight

for long periods, shade the interior using

sunshades.

l

Do not leave vinyl products on the seats for

long periods as they may affect the leather

quality and coloring. If the cabin

temperature becomes hot, the vinyl may

deteriorate and adhere to the genuine

leather.

Fabric

Remove dust and loose dirt from fabric

with a whisk broom or vacuum cleaner.

Clean it with a mild soap solution good

for upholstery and carpets. Remove fresh

spots immediately with a fabric spot

cleaner.

To keep the fabric looking clean and

fresh, take care of it. Otherwise its color

will be affected, it can be stained easily,

and its fire-resistance may be reduced.

CAUTION

Use only recommended cleaners and

procedures. Others may affect

appearance and fire-resistance.

Piano black panel

í

The following parts are fitted with panels

that have been treated with a special

coating that resists scratching.

l

Center panel

l

Door switch panel

l

Steering wheel (partial)

When the panel needs to be cleaned, use a

soft cloth to wipe off dirt from the surface.

NOTE

Scratches or nicks on the panels resulting from

the use of a hard brush or cloth may not be

repairable.

qCleaning the Lap/Shoulder Belt

Webbing

Clean the webbing with a mild soap

solution recommended for upholstery or

carpets. Follow instructions. Don't bleach

or dye the webbing; this may weaken it.

After cleaning the belts, thoroughly dry

the belt webbing and make sure there is

no remaining moisture before retracting

them.

8-64

Maintenance and Care

í

Some models.

Appearance Care

CX-7_8CG3-EA-11J_Edition1 Page456

Saturday, September 24 2011 10:34 AM

Form No.8CG3-EA-11J

1 2 ... 451 452 453 454 455 456 457 458 459 460 461 ... 521 522

Comments to this Manuals

No comments