Mazda 3 2007 Specifications download pdf (Page 44)

Black plate (43,1)

1. Make sure the seatback is securely

latched by pushing it back until it is

fully locked.

2. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on

the child-restraint system for belt

routing instructions.

3. To get the retractor into the automati c

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

4. Push the child-restraint system firmly

into the vehicle seat. Be sure the belt

retracts as snugly as possible. Clicking

from the retractor will be heard during

retraction if the system is in the

automatic locking mode. If the belt

does not lock the seat down tight,

repeat this step.

NOTE

Inspect this function before each use of

the child-restraint system. You should

not be able to pull the shoulder belt out

of the retractor while the system is in

the automatic locking mode. When you

remove the child-restraint system, be

sure the belt fully retracts to return the

system to emergency locking mode

before occupants use the seat belts.

5. If your child-restraint system requires

the use of a tether strap, refer to the

manufacturer's instructions to hook and

tighten the tether strap after raising the

head restraint (except center position).

Essential Safety Equipment

Child Restraint

2-29

Mazda3_8V66-EA-06F_Edition2 Page43

Friday, May 26 2006 10:53 AM

Form No.8V66-EA-06F

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 458 459

Comments to this Manuals

No comments