Mazda 2008 RX-8 Specifications download pdf (Page 353)

Black plate (353,1)

3. Remove the fog light unit by pulling it

downward and then straight out using

both hands.

NOTE

When pulling out the fog light unit, be careful

not to allow the bulb socket to contact the oil

cooler.

4. Press the tab on the bulb socket and

disconnect the connector cord.

5. Rotate the bulb socket

counterclockwise as shown in the

figure and remove it.

6. Replace the bulb.

7. Reinst all the bulb socket in the reverse

order of the removal procedure.

Front turn signal lights/Parking lights

1. Make sure the igni tion switch is turned

off and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all

the way to the right, and turn off

engine. If you are changing the left

bulb, turn the steering wheel to the left.

3. Turn the center section of the plastic

retainer counterclockwise and remove

the retainers and partially peel back the

mudguard.

Removal

Installation

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of the removal procedure.

Maintenance and Care

Owner Maintenance

8-31

RX-8_8Z09-EA-08C_Edition3 Page353

Thursday, July 3 2008 2:24 PM

Form No.8Z09-EA-08C

1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 429 430

Comments to this Manuals

No comments