Mazda L3 User Manual download pdf (Page 2)

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 12 24 36 48 60 72 84 96 108

×1000 km 20 40 60 80 100 120 140 160 180

×1000 miles 12.5 25 37.5 50 62.5 75 87.5 100 112.5

Flat tire repair kit (if installed)

*10

Inspect annually

Chart symbols

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

C: Clean

D: Drain

T: Tighten

Remarks

Emission control and related systems

• The ignition and fuel systems are highly important to the emission control system and to efficient engine

operation.

All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda

Repairer.

• After the prescribed period, continue to follow the described maintenance at the recommended intervals.

• Refer below for a description of items marked* in the maintenance chart.

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 20,000

km (12,500 miles) or 12 months except MZ-CD 1.6 (Y6) engines. Inspect them more often than the recommended

intervals for MZ-CD 1.6 (Y6) engines.

Driving in dusty conditions

Extended periods of idling or low speed operation

Driving for long period in cold temperatures or driving regularly at short distance only

Driving in extremely hot conditions

Driving in mountainous conditions continually

*2: In the countries below, inspect the spark plugs at every 20,000 km (12,500 miles) or 12 months before

replacing them at the said interval.

Croatia, Macedonia, Bosnia and Herzegovina, Serbia, Montenegro, Bulgaria, Romania, Albania, Moldova

*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element

more often than the recommended intervals.

*4: Replacement of the timing belt is required at every 200,000 km (125,000 miles) or 10 years. Failure to replace

the timing belt may result in damage to the engine.

*5: Implement the fuel injection amount correction.

*6: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter at

every 10,000 km (6,250 miles) or shorter.

Driving in dusty conditions

Extended periods of idling or low speed operation

Driving for long period in cold temperatures or driving regularly at short distance only

Driving in extremely hot conditions

Driving in mountainous conditions continually

*7: For MZR-CD 2.2 engine, reset the engine oil data after replacing the engine oil.

*8: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area.

Use FL22 when replacing the coolant.

*9: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle

is operated in extremely humid climates, replace the brake fluid annually.

*10:Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the

tire repair fluid bottle with new one before the expiration date.

L3 Turbo engine

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 12 24 36 48 60 72 84 96 108 120 132 144

×1000 km 5 15 30 45 60 75 90 105 120 135 150 165 180

×1000 miles 3 9 18 27 36 45 54 63 72 81 90 99 108

Engine valve clearance Audibly inspect every 120,000 km (72,000 miles), if noisy, adjust

Drive belts

I I I

Spark plugs

Replace every 90,000 km (54,000 miles)

Air cleaner element

Replace every 60,000 km (36,000 miles) or 3 years

Evaporative system (if installed) I I I

Engine oil

R R R R R R R R R R R R R

1 2 3 4

SCHEDULED MAINTENANCE 1

Comments to this Manuals

No comments

Mazda L3 User Manual Page 2

Comments to this Manuals

Related products and manuals for Engine Mazda L3