8-33
Maintenance and Care
Owner Maintenance
Form No. 8S11-EA-03G
Reverse lights, Taillights
1. Pull the center section of the plastic
retainer and remove the retainers, then
remove the trunk rear trim.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
High-mount brake light
1. Remove the high-mount brake light
component.
2. Detach the electrical connector from
the socket.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
Removal
Installation
Trunk rear trim
Socket
Reverse lights
Taillights
Socket
J56J_8S11-EA-03G_Edition1.book Page 33 Tuesday, June 24, 2003 6:29 PM
Comments to this Manuals