Mazda MAZDA6 Owner's Manual Page 1

Mazda6_8CD1-EA-11C_Edition1 Page1Wednesday, April 6 2011 11:3 AMForm No.8CD1-EA-11C

Interior Equipment (View C)SRS air bag ... ... ... page

qTransmitter MaintenanceIf the buttons on the transmitter areinoperable and the operation indicatorlight does not flash, the battery may bedead.Replac

5. Put in the new battery (CR1620 orequivalent) with the positive pole ()facing down.6. Align the front and back covers andsnap the transmitter shut.7

qDeclaration of ConformityKeyless entry system3-30Knowing Your MazdaDoors and LocksMazda6_8CD1-EA-11C_Edition1 Page102Wednesday, April 6 2011 11:3 AMF

Door LocksWARNINGAlways take all children and pets withyou or leave a responsible person withthem:Leaving a child or a pet unattendedin a parked vehic

qUnlocking with Door Handle(With Advanced Key)The doors can be unlocked by operatin gthe door handle on the front doors whilecarrying the advanced key

(With retractable type key)The vehicle lock-out prevention featureprevents you from locking yourself out ofthe vehicle. With the key in the ignitionsw

Locking, unlocking with transmitter(with retractable type key)All doors can be locked/unlocked byoperating the keyless entry systemtransmitter, refer

NOTEThere are only a total of five auto lock/unlocksettings available. Be sure to press the unlockside of the driver's door-lock switch the corre

Trunk LidWARNINGNever allow a person to ride in thetrunk:Allowing a person to ride in the trunkis dangerous. In addition, the personin the trunk could

Opening the trunk lid with thetransmitter (with retractable type key)The trunk lid can be opened by operatingthe keyless entry system transmitter, ref

FrontHood ... page 3-45Windshield wiper

4. Slide the inside trunk release lever inthe direction of the arrow.After performing this emergency measure,have the vehicle inspected at anAuthorize

Inside Trunk Release LeverYour vehicle is equipped with an insidetrunk release lever that provides a meansof escape for children and adults in theeven

qOpening the Trunk Lid from theInsideSlide the inside trunk release lever in thedirection of the arrow. The lever is madeof material that will glow fo

qOperating the Driver's SidePower WindowNormal opening/closingTo open the window to the desiredposition, lightly hold down the switch.To close th

NOTEDepending on driving conditions, a closingpower window could stop and start openingwhen the window feels a shock that is similarto something block

qPower Window Lock SwitchWith the lock switch in the unlockedposition (button not depressed), all powerwindows on each door can be operated.With the l

qFuel-Filler LidTo open, pull the remote fuel-filler lidrelease.Remote fuel-filler lid releaseqFuel-Filler CapTo remove the fuel-filler cap, turn itco

HoodWARNINGAlways check that the hood is closedand securely locked:A hood that is not closed andsecurely locked is dangerous as itcould fly open while

1. Check under the hood area to makecertain all filler caps are in place andall loose items (e.g. tools, oilcontainers, etc.) have been removed.2. Lif

MoonroofíThe moonroof can be opened or closedelectrically only when the ignition isswitched ON.Tilt switchSlide switchWARNINGDo not let passengers sta

RearTrunk lid ... page 3-36Child safety lock

qSlide OperationTo fully open automatically, momentarilypress the rear of the slide switch.To fully close automatically, momentarilypress the front of

qSunshadeThe sunshade can be opened and closedby hand.The sunshade opens automatically whenthe moonroof is opened, but must beclosed by hand.SunshadeC

Immobilizer System (withAdvanced Key)The immobilizer system allows the engineto start only with an advanced key thesystem recognizes.If someone attemp

Ø Devices for electronic purchases, orsecurity passage which touch orcome near the auxiliary key.NOTElThe advanced keys (including auxiliary key)carry

Declaration of ConformityImmobilizer system3-52Knowing Your MazdaSecurity SystemMazda6_8CD1-EA-11C_Edition1 Page124Wednesday, April 6 2011 11:3 AMForm

qOperationArmingThe system is armed when the ignition isswitched from ON to ACC or OFF. Thesecurity indicator light in the instrumentcluster flashes e

qModification and Add-OnEquipmentMazda cannot guarantee the immobilizersystem's operation if the system has beenmodified or if any add-on equipme

CAUTIONWhen starting the engine do notallow the following, as the enginemay not start due to the electronicsignal from the ignition key not beingtrans

Declaration of ConformityImmobilizer system3-56Knowing Your MazdaSecurity SystemMazda6_8CD1-EA-11C_Edition1 Page128Wednesday, April 6 2011 11:3 AMForm

qOperationArmingThe system is armed when the ignition isswitched from ON to ACC or OFF.The security indicator light in theinstrument cluster flashes e

2Essential Safety EquipmentUse of safety equipment, including seats, seat belt system, child-restraintsystems and SRS air bags.Seats ... ...

Theft-Deterrent SystemíIf the theft deterrent system detects aninappropriate entry into the vehicle, whichcould result in the vehicle or its contentsb

3. Make sure all the windows, themoonroof, the hood and the trunk lidare closed. Close and lock all doors andthe trunk lid from the outside using thek

l(With advanced key)Unlock a door using the sensor on theinside of the door handle.The hazard warning lights will flash twiceto indicate that the syst

Steering WheelWARNINGNever adjust the steering wheel whilethe vehicle is moving:Adjusting the steering wheel whilethe vehicle is moving is dangerous.M

2. Depress the mirror switch in theappropriate direction.Selector switchMirror switchAfter adjusting the mirror, lock the controlby placing the select

Rearview mirror adjustmentBefore driving, adjust the rearview mirrorto center on the scene through the rearwindow.Manual day/night mirrorAuto-dimming

Press the OFF button ( ) to cancel theautomatic dimming function. Theindicator light will turn off.To reactivate the automatic dimmingfunction, press

4Before Driving Your MazdaImportant information about driving your Mazda.Fuel and Engine Exhaust Precautions ...

Fuel RequirementsVehicles with catalytic converters or oxygen sen sors must use ONLY UNLEADED FUEL,which will reduce exhaust emissions and keep spark

Emission Control SystemYour vehicle is equipped with an emission control system (the catalytic converter is part ofthis system) that enables your vehi

Front Seats (ManuallyOperated Seats)WARNINGDo not modify or replace the frontseats:Modifying or replacing the front seatssuch as replacing the upholst

Engine Exhaust (Carbon Monoxide)WARNINGDo not drive your vehicle if you smell exhaust gas inside the vehicle:Engine exhaust gas is dangerous. This gas

Before Getting InlBe sure the windows, outside mirrors,and outside lights are clean.lInspect inflation pressures andcondition of tires.lLook under the

Break-In PeriodNo special break-in is necessary, but a fewprecautions in the first 1,000 km (600miles) may add to the perfo rmance,economy, and life o

Hazardous DrivingWARNINGBe extremely careful if it is necessary todownshift on slippery surfaces:Downshifting into lower gear whiledriving on slippery

Rocking the VehicleWARNINGDo not spin the wheels at more than 56km/h (35 mph), and do not allowanyone to stand behind a wheel whenpushing the vehicle:

qSnow TiresUse snow tires on all four wheelsDo not go faster than 120 km/h (75 mph)while driving with snow tires. Inflatesnow tires 30 kPa (0.3 kgf/cm

OverloadingWARNINGBe careful not to overload your vehicle:The gross axle weight rating (GAWR)and the gross vehicle weight rating(GVWR) of your vehicle

Driving on Uneven RoadYour vehicle's suspension and underbody can be damaged if driven on rough/uneven roadsor over speed bumps at excessive spee

Trailer TowingThe Mazda6 is not designed for towin g.Never tow a trailer with your Mazda6.4-12Before Driving Your MazdaTowingMazda6_8CD1-EA-11C_Editio

5Driving Your MazdaExplanation of instruments and controls.Starting and Driving ...

Make sure the lever returns to its originalposition and the seat is locked in place byattempting to push it forward andbackward.qSeat ReclineWARNINGDo

Ignition SwitchWith advanc ed keyRefer to “Starting the engine (page 3-10)”for information on how to use the ignitionswitch.qIgnition Switch Positions

WARNINGRemove the key only when the vehicleis parked (with steering lockmechanism):Removing the key from the ignitionswitch while the vehicle is movin

Starting the EngineWith advanc ed keyRefer to “Starting the engine (page 3-10)”for information on how to start the engine.NOTEEngine-starting is contr

Turning the Engine Off1. Stop the vehicle completely.2. (Manual tran saxle)Shift into neutral.(Automatic transaxle)Shift the shift lever to the P posi

WARNINGDo not coast with the engine stalled orturned off, find a safe place to stop:Coasting with the engine stalled orturned off is dangerous. Brakin

qParking BrakeWARNINGBefore leaving the driver's seat, alwaysswitch the ignition off, set the parkingbrake, and make sure the shift lever isin P

qBrake System Warning LightThis warning has the following functions:Parking brake warningThe light illuminates when the parkingbrake is applied with t

WARNINGDo not rely on ABS as a substitute forsafe driving:The ABS cannot compensate forunsafe and reckless driving, excessivespeed, tailgating (follow

WARNINGDo not drive with both the ABS warninglight and brake warning lightilluminated. Have the vehicle towed toan Authorized Mazda Dealer to havethe

Manual Transaxle OperationqManual Transaxle Shift PatternNeutral positionThe shift pattern of the transaxle isconventional, as shown.Depress the clutc

CAUTIONWhen returning a rear-reclinedseatback to its upright position,make sure you hold onto theseatback with your other hand whileoperating the leve

qRecommendations for ShiftingUpshiftingFor normal acceleration, we recommend these shiftpoints.Gear Vehicle speed1 to 2 24 km/h (15 mph)2 to 3 43 km/h

Automatic Transaxle ControlsIndicates that you must depress the brake pedal to shift (The ignition must be switched to ACC or ON). Indicates the shift

qTransaxle RangesThe shift lever must be in P or N tooperate the starter.P (Park)P locks the transaxle and prevents thefront wheels from rotating.WARN

qActive Adaptive Shift (AAS)Active Adaptive Shift (AAS)automatically controls the transaxle shiftpoints to best suit the road conditions anddriver inp

qManual Shift ModeThis mode gives you the feel of driving amanual transaxle vehicle by operating theshift lever and allows you to controlengine rpm an

ShiftingManually Shifting up(M1 → M2 → M3 → M4 → M5 →M6í)To shift up to a higher gear, tap the shiftlever back () once.NOTElWhen driving slowly, the g

Second gear fixed modeWhen the shift lever is tapped bac k ()while the vehicle is stopped or drive n atthe following speeds, the transaxle is setin th

If the vehicle is kicked down at thefollowing speeds or lower, the gears shiftdown automatically:GearVehicle speed2.5-liter enginemodel3.7-liter engin

Power SteeringPower steering is only operable when theengine is running. If the engine is off or ifthe power steering system is inoperable,you can sti

qActivation/DeactivationTo activate the system, press the ONswitch.The cruise main indicator lightilluminates.To deactivate the system, press the OFFs

CAUTIONØ The seat-bottom poweradjustment is operated by motors.Avoid extended operation becauseexcessive use can damage themotors.Ø To prevent the bat

qTo Increase Cruising SpeedFollow either of these procedures.To increase speed using cruise controlswitchPress up the cruise control SE Tswitchand hol

Your vehicle has a tap-down feature thatallows you to decrease your current speedin decrements of 1.6 km/h (1 mph) by amomentary tap of the cruise con

Traction Control System(TCS)The Traction Control System (TCS)enhances traction and safety bycontrolling engine torque and braking.When the TCS detects

Dynamic Stability Control(DSC)The Dynamic Stability Control (DSC)automatically controls braking and enginetorque in conjunction with systems suchas AB

qDSC OFF Indicator LightThis indicator light stays on for a fewseconds when the ignition is switchedON.It also illuminates when the DSC OFFswitch is p

Tire Pressure Monitoring SystemThe tire pressure monitoring system (TPMS) monitors the pressure for each tire.If tire pressure is too low in one or mo

CAUTIONØ Each tire, including the spare (if provided), should be check ed monthly when coldand inflated to the inflation pressure recommended by the v

qTire Pressure Monitoring SystemWarning LightThis warning light illuminates for a fewseconds when the ignition is switchedON.Thereafter, the warning l

Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-7).CAUTIONWhen replacing/repairing the tires orwheels

If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temp

To change the seatback angle, press thefront or rear side of the reclining switch.Release the switch at the desired position.qHeight Adjustment (Drive

3. After about 15 minutes, drive thevehicle at a speed of at least 25 km/h(16 mph) for 10 minutes and the tirepressure sensor ID signal code will bere

Blind Spot Monitoring (BSM) SystemíThe Blind Spot Monitoring (BSM) system is designed to assist the driver by monitoringblind spots on both sides of t

lThe detectability of the radar sensors has its limitations. The BSM system may not operateproperly under the following conditions:lIce, snow, or soil

lThe following conditions may affect the visibility of the BSM warning lights on the outside mirror,making it difficult to confirm the illumination of

qBSM OFF SwitchWhen the BSM switch is pressed, theBSM system turns off and the BSM OFFindicator light illuminates.Press the BSM OFF switch again to tu

2. This device must accept anyinterference received, includinginterference that may cause undesiredoperation.3. This device may only work when thevehi

Meters and GaugesSpeedometer ... page 5-39Odometer,

qSpeedometerThe speedometer indicates the speed ofthe vehicle.qOdometer, Trip Meter, OutsideTemperature Display and SelectorThe display mode changes f

NOTEl(Standard meter)The odometer and trip meter can bedisplayed and the selector can be operatedas follows even when the ignition isswitched to ACC o

Temperature unit change functionThe unit (°F/°C) for the ambienttemperature can be switched using thefollowing operation.1. Switch the ignition ON.2.

Operation using the seat-side buttonsProgrammingPark the vehicle in a safe location beforeperforming the seat positionprogramming. (Vehicle must be st

qEngine Coolant Temperature GaugeThe engine coolant temperature gaugeshows the temperature of the enginecoolant.If the needle is near H, it indicateso

qDashboard IlluminationRotate the knob to adjust the brightness ofthe instrument cluster and otherilluminations in the dashboard.NOTElThe brightness o

Warning/Indicator LightsWarning/Indicator lights will appear in any of the highlighted areasSignal Warning/Indicator Lights PageBrake System Warning L

Signal Warning/Indicator Lights PageAir Bag/Front Seat Belt Pretensioner System Warning Light 5-50Low Fuel Warning Light 5-50Check Fuel Cap Warning Li

Signal Warning/Indicator Lights PageBSM OFF Indicator Light 5-58Lights-On Indicator Light 5-58Turn Signal/Hazard Warning Indicator Lights 5-58qBrake S

WARNINGDo not drive with the brake systemwarning light illuminated. Contact anAuthorized Mazda Dealer to have thebrakes inspected as soon as possible:

qElectronic Brake ForceDistribution System WarningIf the electronic brake force distributioncontrol unit determines that somecomponents are operating

If the light illuminates while driving:1. Drive to the side of the road and parkoff the right-of-way on level ground.2. Turn off the engine and wait 5

If the powertrain malfunction/reducedpower warning light remains on, do notdrive at high speeds and consult anAuthorized Mazda Dealer as soon aspossib

qSeat Belt Warning LightWith warn ing light for frontpassenger's seatThe seat belt warning light illuminates ifthe driver or front passenger&apos

Mazda6_8CD1-EA-11C_Edition1 Page2Wednesday, April 6 2011 11:3 AMForm No.8CD1-EA-11C

1. Adjust the seat to the desired position.For each seat position adjustmentmethod, refer to the following pages:Seat Slide (page 2-5)Seat Recline (pa

qTire Pressure Monitoring System(TPMS) Warning LightThis warning light illuminates for a fewseconds when the ignition is switchedON.Thereafter, the wa

Adjust the tire pressure to the correct tirepressure. Refer to the specification charts(page 10-7).CAUTIONWhen replacing/repairing the tires orwheels

If the warning light illuminates again evenafter the tire pressures are adjusted, theremay be a tire puncture. Replace thepunctured tire with the temp

lUnder the following conditions, theKEY warning light (red) will flashcontinuously when the push buttonstart has not been pressed off to notifythe dri

The light stops flashing when the ignitionis switched ON with the correct ignitionkey.At this time, the immobilizer system isdisarmed and the light il

If the light stays on, the TCS, DSC or thebrake assist system may have amalfunction and they may not operatecorrectly. Take your vehicle to anAuthoriz

qBSM OFF Indicator LightíThis indicator light illuminates for a fewseconds when the ignition is switchedON.The BSM OFF indicator light illuminateswhen

Beep SoundsqAir Bag/Front Seat BeltPretensioner System Warning BeepIf a malfunction is detected in the air bag/front seat belt pretensioner systems an

qAdvanced Keyless Warning (withAdvanced Key)íWarning indicators for the advanced key,such as “the advanced key removed fromvehicle warning”, use a bee

Lighting ControlqHeadlightsTurn the headlight switch to turn the headlights, other exterior lights and dashboardillumination on or off.NOTElTo prevent

Rear SeatWARNINGMake sure luggage and cargo aresecured before driving:Not securing cargo while driving isdangerous as it could move or becrushed durin

With AUTO positionSwitch PositionHeadlights OffAutoOff OnTaillightsParking lightsLicense lightsDashboard illuminationOff On On5-62Driving Your MazdaSw

AUTO (Auto-light control)When the headlight switch is in the AUTO position and the ignition is switched ON, thelight sensor senses the surrounding lig

Xenon fusion headlight bulbsíThe low-beam bulbs of the headlights have xenon fusion bulbs that produce a bright whitebeam over a wide area.WARNINGDo n

qHeadlight LevelingíThe number of passengers and weight ofcargo in the luggage compartment cha ngethe angle of the headlights.The headlight leveling s

Turn and Lane-ChangeSignalsTurn SignalsMove the signal lever down (for a leftturn) or up (for a right turn) to the stopposition. The signal will self-

Fog LightsíUse this switch to turn on the fog lights.The fog lights will help you to see as wellas be seen under foggy conditions or atnight.To turn t

NOTEBecause heavy ice and snow can jam the wiperblades, the wiper motor is protected frommotor breakdown, overheating and possiblefire by a circuit br

AUTO (Auto-wiper control)When the wiper lever is in the AUTOposition, the rain sensor senses theamount of rainfall on the windshield andturns the wipe

Ø When the wiper lever is in theAUTO position and the ignition isswitched ON, the wipers maymove automatically in thefollowing cases:ØIf the windshiel

qWindshield WasherPull the lever toward you and hold it tospray washer fluid.OFFWasherNOTEWith the wiper lever in the OFF or intermittentposition/AUTO

NOTEWhen returning a rear seat to its originalposition, also replace the seat belt to itsnormal position. Verify that the seat belt pullsout and retra

Manual Type Air-ConditioningIndicator lightCAUTIONDo not use sharp instruments orwindow cleaners with abrasives toclean the inside of the rear windows

Hazard Warning FlasherThe hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency.The hazard warning lights warn

WARNINGDo not use the HomeLink system withany garage door opener that lacks thesafety stop and reverse feature:Using the HomeLink system with anygarag

The HomeLink system provides 3 buttonswhich can be individually selected andprogrammed using the transmitters forcurrent, on-market devices as follows

HomeLink should now activate yourrolling code equipped device.NOTETo program the remaining two HomeLinkbuttons, begin with “Programming” ― step 2.Do n

6Interior ComfortUse of various features for drive comfort, including air-conditioning and audiosystem.Climate Control System ...

Operating TipsqOperating the Climate ControlSystemOperate the climate control system withthe engine running.NOTETo prevent the battery from being disc

Vent OperationqAdjusting the VentsDirecting airflowSide VentsTo adjust the direction of airflow, open thevents and rotate them left and right.PushCent

qSelecting the Airflow ModeDashboard VentsDashboard and Floor VentsFloor VentsDefroster and Floor VentsDefroster Vents6-4Interior ComfortClimate Contr

Types of the Climate Control SystemManual type and fully automatic type climate control systems are explained separately.Check your vehicle's cli

WARNINGAlways make sure the seat belts arefully pulled out from under theseatbacks:A seat belt caught under a seatbackafter the seatback is returned t

Manual TypeTemperature control dialFan control dialMode selector dialA/C switch Air intake selectorRear window defroster switchqControl SwitchesTemper

Fan control dialSlowFastThis dial allows variable fan speeds.0―Fan off1―Low speed2―Medium low speed3―Medium high speed4―High speedMode selector dialTu

Outside air mode (indicator lightturned off)Outside air is taken into the vehicle. Usethis mode for normal ventilation andheating.Recirculated air mod

CAUTIONWhen using the air conditioner whiledriving up long hills or in heavytraffic, closely monitor thetemperature gauge (page 5-42).The air conditio

NOTElFor quick cabin cooling, rotate thetemperature control dial counterclockwiseto the MAX-A/C position. The A/C systemautomatically turns on and the

Fully Automatic TypeClimate control information is displayed on the information display.Information displayA/CAUTO Air intake displayTemperature setti

qControl SwitchesAUTO switchBy pressing the AUTO switch thefollowing functions will be automaticallycontrolled in accordance with the selectedset temp

Mode selector switchThe desired airflow mode can be selected(page 6-4).NOTElWith the airflow mode set to theposition and the temperature control dials

DUAL switchUse the DUAL switch to change the modebetween the individual operation (driverand passenger) and interconnection(simultaneous) modes.Indivi

NOTElSetting the temperature to the maximumhigh or low will not provide the desiredtemperature at a faster rate.lWhen selecting heat, the system will

Rear outboard seatSeat WarmeríPress the HI or LO side of the seat warmerswitch with the ignition switched ON. Theindicator on the switch illuminates a

AntennaqAM/FM Radio AntennaThe antenna is printed onto the windowglass.CAUTIONWhen washing the inside of thewindow which has an antenna, use asoft clo

qRadio ReceptionAM characteristicsAM signals bend around such things asbuildings or mountains and bounce off theionosphere. Therefore, they can reachl

Flutter/Skip noiseSignals from an FM transmitter move instraight lines and become weak in valleysbetween tall buildings, mountains, andother obstacles

qOperating Tips for CD Player/In-Dash CD ChangerCondensation phenomenonImmediately after turning on the heaterwhen the vehicle is cold, the CD oroptic

lA new CD may have rough edges onits inner and outer perimeters. If a discwith rough edges is used, propersetting will not be possible and the CDplaye

lDo not use record sprays, antistaticagents, or household spray cleaners.Volatile chemicals such as benzine andthinner can also damage the surface oft

lThis unit can play MP3s with samplingfrequencies of 16/22.05/24/32/44.1/48kHz.lThis unit can play MP3 files that havebeen recorded in bit rates of 8

lThe maximum number of charactersthat can be used for file names is asfollows. However, this unit will onlydisplay up to 32 characters, includingthe f

Bit rateRefers to the volume of data per second,expressed in bps (bits per second).Generally, the larger the number of thetransfer bit rate when compr

Types of the Audio SetAudio Set (Type A) ... ... page 6-27Au

WARNINGØ Be careful when using the seatwarmer. The heat from the seatwarmer may be too hot for somepeople, as indicated below, andcould cause a low-te

MEMO6-26Mazda6_8CD1-EA-11C_Edition1 Page250Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

Audio Set (Type A)Audio information is displayed on the information display.CD PlayerIn-Dash CD ChangerThe , buttons are only functional if the vehicl

qPower/Volume/Sound ControlsPower/Volume dial Audio control dialPower ON/OFFSwitch the ignition to ACC or ON.Press the power/volume dial to turn theau

*1*1*1*1*2*1 Depending on the mode selected, theindication changes.*2 Depending on the model, thisfunction, may not be available.2. Turn the audio con

Select the desired ALC mode.Mode Volume changeNo changeMinimumMediumMaximumTurn the audio control dial to select ALCOFF or ALC LEVEL1―7 modes. Thesele

MEMO6-31Mazda6_8CD1-EA-11C_Edition1 Page255Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

qOperating the RadioChannel preset buttonsSeek tuning buttonsManual tuning dialBand selector buttonsScan buttonChannel preset buttonsAuto memory butto

NOTEIf you continue to press and hold the button,the frequency will continue changing withoutstopping.Scan tuningPress the scan button ()toautomatical

qOperating the Compact Disc (CD) PlayerTrack down/Reverse buttonTrack up/Fast-forward buttonCD eject buttonCD slotCD play buttonDisplay buttonFolder d

Fast-forward/ReversePress and hold the fast-forward button() to advan ce through a track at highspeed.Press and hold the reverse button ()toreverse th

Seat Belt PrecautionsSeat belts help to decrease the possibility of severe injury during accidents and suddenstops. Mazda recommends that the driver a

During MP3/WMA CD playback(Folder random)1. Press the random button () duringplayback to play the tracks in the folderrandomly. “FOLDER RDM” isdisplay

NOTEThe displayable number of characters islimited. If the number of characters, includingthe file extension (.mp3/.wma), exceeds 32characters, it may

qOperating the In-Dash CD ChangerTrack up/Fast-forward buttonCD eject buttonDisplay buttonLoad buttonChannel preset buttonsTrack down/Reverse buttonTe

Multiple insertion1. Press and hold the load button ()for about 2 seconds until a beep soundis heard.2. When “IN” is displayed, insert the CD.3. When

Press the track down button ( ) once toskip back to the beginning of the currenttrack.Disc searchDuring music CD playbackTo change the disc, press the

During MP3/WMA CD playback(Folder random)1. Press the random button () duringplayback to play the tracks in the folderrandomly. “FOLDER RDM” isdisplay

NOTEThe displayable number of characters islimited. If the number of characters, includingthe file extension (.mp3/.wma), exceeds 32characters, it may

qError IndicationsIf you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicl

MEMO6-44Mazda6_8CD1-EA-11C_Edition1 Page268Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

Audio Set (Type B)Functions and information available for the selected mode are displayed on the left andright of the audio unit screen. To select and

WARNINGAlways wear your seat belt and make sure all occupants are properly restrain ed:Not wearing a seat belt is extre mely dangerous. During a colli

qScreen Adjustments and Other SettingsSelection button 1Selection button 2Selection button 3Selection button 4Display buttonSelection button 5Selectio

Color adjustment*To deepen a colorPress selection button 7.To fade colorPress selection button 3.* Adjustment is available depending onthe display.NOT

qPower/Volume/Sound ControlsAudio control buttonPower/Volume dialReturn buttonSelection button 1Selection button 2Selection button 3Selection button 5

Press selection button 8.Setting item Setting valueBass Down UpTreble Down UpFader Rear FrontBalance Left RightBeep Off OnAudioPilot®2 Off OnCenterpoi

Centerpoint®offPress selection button 2.NOTElCenterpoint®operates optimally with a 2-channel stereo CD. MP3 audio files can beplayed, however, MP3 aud

MEMO6-51Mazda6_8CD1-EA-11C_Edition1 Page275Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

qOperating the RadioMute buttonAuto memory buttonScan buttonSeek tuning buttonsReturn button Manual tuning dialBand selector buttonSelection button 2S

NOTEIf you continue to press and hold the seektuning button (, ), the frequency willcontinue changing without stopping.Scan tuningPress the scan butto

NOTEIf any of the following operations is performed,the radio text information display is clearedand the normal display appears.lReturn button ( ) is

MEMO6-55Mazda6_8CD1-EA-11C_Edition1 Page279Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

CAUTIONBelt retraction may become difficult if the belts and rings are soiled, so try to keepthem clean. For more details about cleaning the seat belt

qOperating the Satellite RadioíCategory down buttonCategory up buttonPlay/Pause buttonManual tuning dial/Enter button/Text buttonScan buttonSeek tunin

NOTEThis equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits a

SIRIUS service uses an ID code toidentify your radio. This code is needed toactivate SIRIUS service, and report anyproblems.To activate you SIRIUS rad

“Updating channels XXX% complete” isdisplayed when the SIRIUS channel mapis changed. If the “Updating channelsXXX% complete” display is not available,

Category upPress the category up button ().Category downPress the category down button ().Every time the category up button ()ispressed, the category

lA category name may have a full titleand an abbreviated title. In this case,the full title is displayed. If thecategory only has an abbreviated title

(If the SIRIUS ID (ESN) for the tunerdoes not display)If “ESN Fail” is displayed, contact anAuthorized Mazda Dealer.Parental lockParental lock, parent

(Registered ID code inputconfirmation)6. After inputting the four digits, turn themanual tuning dial and select “OK”,and then press the enter button()

(Master code input)4. Turn the manual tuning dial to select anumber and then press the enter button() to input the number.NOTEMaster code:The Master C

MEMO6-65Mazda6_8CD1-EA-11C_Edition1 Page289Wednesday, April 6 2011 11:4 AMForm No.8CD1-EA-11C

qAutomatic Locking ModeAlways use the automatic locking mode to keep the child-restraint system from shifting toan unsafe position in the event of an

qOperating the In-Dash CD ChangerFolder down buttonFolder up buttonPlay/Pause buttonScan buttonTrack down buttonTrack up buttonFile dial/Text buttonCD

Multiple CD insertion1. Press and hold the load button ().2. Press the load button () again.When “Please Insert a Disc ” isdisplayed, insert the CD.3.

NOTEIf the entire title cannot be displayed, “...” isadded at the end to the part of the title whichcan be displayed.If title information is not avail

2. Press selection button 1 twice to cancelthe repeat playback.(Folder repeat)1. Press selection button 1 twice duringplayback to play the tracks in t

qError IndicationsIf you see an error indication on the display, find the cause in the chart. If you cannot clearthe error indication, take the vehicl

Audio Control SwitchOperationWhen the audio unit is turned on,operation of the audio unit from thesteering wheel is possible.NOTEBecause the audio uni

Without Bluetooth Hands-Free andnavigation systemWith Bluetooth Hands-Free only/Bluetooth Hands-Free and navigationsystemqChanging the Source(Type A)P

NOTECD, CD changer, SIRIUS digital satelliteradio, and BT audio modes cannot be selectedin the following cases:lSIRIUS digital satellite radio unit, o

qMute SwitchíPress the mute switch ( ) once to mut eaudio, press it again to resume audiooutput.NOTEIf the ignition is switched off with the audiomute

CAUTIONØ Close the lid when the auxiliaryjack is not in use to preventforeign objects and liquids frompenetrating the auxiliary jack.Ø Depending on th

Thank you for choosing a Mazda. We at Mazda design and build vehicles with completecustomer satisfaction in mind.To help ensure enjoyable and trouble-

Seat BeltqFastening the Seat Belt1. Grasp the seat belt tongue.2. Slowly pull out the lap/shoulder belt.Seat belt tongueLap/shoulder belt3. Insert the

3. (Type A)Press the AUX button () of theaudio unit or the mode switch ()of the audio control sw itches on thesteering wheel to change to the AUXmode.

Safety CertificationThis CD player is made and tested to meet exacting safety standards. It meets FCCrequirements and complies with safety performance

Bluetooth Audio (Type A)íChannel preset buttonsAudio control dialAUX buttonChannel preset buttonsTrack up buttonTrack down buttonPlay/Pause buttonqWha

Ø Because only specified Blu etoothaudio devices can be used, consultan Authorized Mazda Dealer whenpurchasing or changing devices.Bluetooth audio dev

NOTElIt may not be possible to play a Bluetoothaudio device if it is placed anywheretransmission is compromised, such asinside a metal container or th

2. Turn the audio control dial and select adesired mode.Display Mode FunctionPAIR DEVICEPairingprogram modeBluetoothaudio deviceprogrammingLINK CHANGE

2. Press the audio control dial todetermine the mode.After “ENTER PIN” is displayed onthe information display for threeseconds, “PIN 0000” is displaye

6. When the programming is completed,“” and “PAIR SUCCESS ” aredisplayed after about 10-30 seconds,after which “PAIR SUCCESS”continues to be displayed

4. Turn the audio control dial to select thename of the device you would like tolink.Device name 1Device name 2Device name 3Device name 4Device name 5

4. Rotate the audio control dial and selectthe name of the programmed deviceyou would like to delete.Device name 1Device name 2Device name 3Device nam

qUnfastening the Seat BeltDepress the button on the seat belt buckle.If the belt does not fully retract, pull it outand check for kinks or twists. The

4. Rotate the audio control dial to selectthe information for the Bluetooth unitwhich you would like to view.Device nameBT addressNOTEWhen “GO BACK” i

Bluetooth Audio (Type B)íSelection button 1Selection button 2Track up buttonSelection button 3Selection button 4Manual tuning dial/Enter button/Text b

Ø Because only specified Blu etoothaudio devices can be used, consultan Authorized Mazda Dealer whenpurchasing or changing devices.Bluetooth audio dev

Bluetooth is the registered trademark ofBluetooth SIG. Inc.NOTElIt may not be possible to play a Bluetoothaudio device if it is placed in a locationwh

Programming a Bluetooth audio devicewhich has a PIN code (four digits)1. Press selection button 2 to display theBluetooth audio setting menu screen.2.

5. Operate the Bluetooth audio device andset it to the program mode while“Pairing is in progress. Please startpairing procedure on your Bluetoothdevic

NOTElSome Bluetooth audio devices need acertain amount of time before the “”symbol is displayed.lIf a link change error occurs, check theprogramming s

6. When the link deletion is completed,“Deleted” is displayed, and then itreturns to the normal display.If an error occurs while trying to deletethe l

NOTElIf the Bluetooth audio device does not beginplayback, press the Play/Pause button().lIf the mode is switched from Bluetoothaudio mode to another

Bluetooth Hands-FreeíqWhat is Bluetooth Hands-Free?Bluetooth Hands-Free OutlineBy connecting a Bluetooth equippeddevice (Mobile phone) to the hands-fr

Front Seat Belt Pretensionerand Load Limiting SystemsFor optimum protection, the driver andfront passenger seat belts are equippedwith pretensioner an

lA2DP (Advanced Audio DistributionProfile) Ver. 1.0lOPP (Object Push Profile) Ver. 1.1Bluetooth is the registered trademark ofBluetooth SIG. Inc.NOTEl

Information display (Type A/Navigation system)When available, the information displayshows telephone numbers, BluetoothHands-Free messages, and operat

NOTEIf the voice recognition performance is notsatisfactory, refer to “Voice RecognitionLearning Function (Speaker Enrollment)”(page 6-117).Please be

NOTEFor vehicles with the navigation system, youcan also press the talk button with a shortpress and say: [Beep] “Telephone” or“Phone”.2. Say: [Beep]

Basic Bluetooth Hands-Free OperationqBluetooth Hands-Free PreparationLanguage settingThe available languages are English,Spanish, and Canadian French.

3. Prompt: “Would you like to changethe language to French (Desiredlanguage)?”4. Say: [Beep] “Ye s ”5. Prompt: “Please wait. Switching toFrench phoneb

NOTElA device can be programmed only when thevehicle is parked. If the vehicle starts tomove, the pairing procedure will end.Programming is dangerous

14. Prompt: “XXXXXX - - - (Ex.“Stan's device”) (Device tag). Is thiscorrect?”15. Say: [Beep] “ Ye s ”16. Prompt: “Pairing complete”After a device

6. (Dialing)Press the pick-up button or say “Dial”,then go to Step 7.(Adding/inputting telephonenumber)Say, “XXXX” (desired telephonenumber), then go

Convenient Use of theHands-Free SystemqPhonebook UsagePhonebook registrationPhone numbers can be registered to theBluetooth Hands-Free phonebook.NOTED

Do not modify the components orwiring, or use electronic testing deviceson the pretensioner system:Modifying the components or wiringof the pretension

Import contactPhonebook data from your device (Mobilephone) can be sen t and registered to yourBluetooth Hands-Free phonebook usingBluetooth.1. Press

5. Prompt: “Calling XXXXX... (Ex.“John's phone”) XXXX (Ex. “athome”). Is this correct?” (Voice tag andphone number location registered inphoneboo

Canceling mute1. Press the talk button with a short press.2. Say: [Beep] “Mute off”3. Prompt: “Microphone unmuted”qTransferring a CallTransferring a c

4. Say: [Beep] “XXXXXXXXXXX(Telephone number)”5. Prompt: “XXXXXX XXXXX.(Telephone number) After the beep,continue to add numbers, or say Go-Back to re

7. Prompt: “Home, Work, Mobile, orOther?”8. Say: [Beep] “Home” (Say theregistered location to be edited:“Home”, “Work”, “Mobile”,or“Other”).9. Prompt:

5. Prompt: “Please say the name of theentry you would like to delete or say,“List names”.”6. Say: [Beep] “XXXXX... (Ex. “John'sphone”)” (Say the

Press the talk button with a short pressduring the read-out at the desired name,and then say one of the following voicecommands to execute it.l“Contin

7. Prompt: “XXXXX..., XXX XX...,XXXXX... (Ex. Device A, device B,device C)” (The voice guidance readsout the device tags registered to thehands-free s

Music player1. Press the pick-up button (with/withoutnavigation system) or talk button witha short press (without navigationsystem) or a long press (w

6. Say: [Beep] “Delete ”7. Prompt: “Please say the name of thedevice you would like to delete.Available devices are XXXXX... (Ex.device A), XXXXX... (

A system malfunction is indicated if thewarning light constantly flashes,constantly illuminates or does notilluminate at all when the ignition isswitc

3. Prompt: “Select one of the following:Pairing options, confirmation prompts,language, passcode, select phone orselect music player.”4. Say: [Beep] “

Confirmation PromptsThe confirmation prompt confirms thecommand content to the user beforeadvancing to the operation requested bythe user. When this f

NOTEFor vehicles with the navigation system, youcan also press the talk button with a shortpress and say: [Beep] “Telephone” or“Phone”.2. Say: [Beep]

Voice input command list for voicerecognition learningWhen reading out, the following pointsmust be observed:lRead out the numbers one at a timecorrec

When Bluetooth Hands-Free Cannot be UsedBluetooth Hands-Free cannot be usedunder the following conditions:lThe device is outside of thecommunication a

Mazda Bluetooth Hands-Free Customer ServicelU.S.A.Phone: 800-430-0153 (Toll-free)www.MazdaUSA.com/bluetoothlCanadaPhone: 800-430-0153 (Toll-free)www.m

Bluetooth Hands-FreeíSelection button 1Selection button 2Selection button 3Selection button 4Return buttonPhone buttonPower/Volume dial Manual tuning

CAUTIONThe types of devices (Mobile phone)which can be connected to thehands-free unit are limited.Therefore, before purchasing orchanging your device

Pick-up button and Hang-up buttonBasic functions of Bluetooth Hands-Freecan be used for such things as makingcalls or hanging up using the pick-upbutt

NOTElA device can be programmed only when thevehicle is parked. If the vehicle starts tomove, the pairing procedure will end.Programming is dangerous

Seat Belt ExtenderIf your seat belt is not long enough, evenwhen fully extended, a seat belt extendermay be available to you at no charge fromyour Aut

6. Operate the Bluetooth Hands-Freedevice while“Pairing is in progress. Please startpairing procedure on your Bluetoothdevice. Use the PIN “xxxx”.” is

1. Turn the manual tuning dial to select anumber and then press the enter button() to input the number.2. After inputting the telephone number,press s

2. Press selection button 1 and select“Start” to start import. “Importing” isdisplayed.3. Before the import is completed, pressselection button 2 and

5. Say: [Beep] XXXXX... (Ex.“Mary's phone”)” (Say a voice tag forthe name registered.)6. Prompt:“Adding XXXXX... (Ex. “Mary'sphone”) (Regist

Making a call using the incoming callrecord1. Press selection button 4 to display theincoming call record screen.2. Press the desired selection butt o

Hands-Free SettingqDeviceDevice registrationFor the registration of a Bluetoothequipped device to Bluetooth Hands-Free,refer to“Bluetooth Hands-Free P

6. When the link change is completed, a“” symbol and “Link Changed” aredisplayed, and then it returns to thenormal display.If an error occurs while tr

NOTEIf the device name and Bluetooth addresscannot be displayed, “...” is added at the endto the part of the title which can be displayed.When Bluetoo

Safety CertificationFCC ID: CB2MBLUEC09 IC:279B-MBLUEC09This device complies with Part 15 of theFCC Rules and with RSS-210 of IndustryCanada. Operatio

Rear View MonitoríThe rear view monitor is a visual assist system when reversing the vehicle that providesimages from the rear of the vehicle.WARNINGT

Do not leave a seat belt extenderconnected to the buckle:Leaving a seat belt extenderconnected to the buckle withoutusing the seat belt is dangerous.W

qRear View Parking Camera LocationRear view parking cameraqSwitching to the Rear View Monitor DisplayShift the shift lever to R with the ignition swit

qDisplayable Range on the ScreenThe images on the screen may be different from the actual conditions.(Screen display)(Actual view)ObjectGarnishBumperN

qRear View Monitor OperationThe operation of the re ar view monitor when reversing the vehicle varies depending on thetraffic, road, and vehicle condi

qVariance Between Actual Road Conditions and Displayed ImageSome variance occurs between the actual road and the displayed road. Such variance indista

When there is a steep grade behind the vehicleWhen there is a steep upgrade (downgrade) behind the vehicle, the object displayed on thescreen appears

SunvisorsWhen you need a sunvisor, lower it foruse in front or swing it to the side.SunvisorqSide Extension SunvisorsThe visor extender extends the su

Interior LightsqIlluminated Entry SystemWhen the illuminated entry systemoperates, the overhead light (switch is inthe DOOR position), the courtesy li

qMap LightsThe map lights are switched on or off bypressing the switches.qCourtesy LightsTurns on when any door is open or theilluminated entry system

Information DisplayAudio/hands-free displayClimate control displayClimate control display ClockTrip computer Climate control displayClimate control di

qClockNOTE(With CLOCK button)When the trip computer is being displayed,press the CLOCK button to change the displayto the time.When the ignition is sw

Seat Belt ReminderNOTEConsult an Authorized Mazda Dealer todeactivate or restore the belt reminder. Thoughthe belt reminder can be deactivated, doing

NOTEWhen the time is being displayed, press theINFO switch to change the display to the tripcomputer.If you have any problems with your tripcomputer,

CANADATo clear the data being displayed, pressthe INFO switch for more than 1.5second.After pressing the INFO switch, - - - L/100 km (- - - mpg) will

U.S.A.CANADATo clear the data being displayed, pressthe INFO switch for more than 1.5second. After pressing the INFO switch, -- - km/h (- - - mile/h)

To fit small items in the cup holder,remove the flexible divider.Flexible dividerqRearíThe rear cup holder is on the rear centerarmrest.Bottle HolderB

Storage CompartmentsWARNINGKeep storage boxes closed whendriving:Driving with the storage boxes openis dangerous. To reduce thepossibility of injury i

qCenter ConsoleTo open, pull the lower release handle.Storage trayíThe storage tray can be installed to thefront/back side of the center console.Insta

To retract the armrest, slide it completelyto the rear.qShopping Bag HookThe shopping bag hook can be used forhanging shopping bags.CAUTIONDo not hang

Accessory SocketsOnly use genuine Mazda accessories orthe equivalent requiring no greater than120 W (DC 12 V, 10 A).FrontThe ignition must be switched

CAUTIONØ To prevent accessory socketdamage or electrical failure, payattention to the following:ØDo not use accessories thatrequire more than 120 W (D

7In Case of an EmergencyHelpful information on what to do in an emergency.Parking in an Emergency ...

Child Restraint PrecautionsMazda strongly urges the use of child-restraint systems for children sma ll enough to usethem.You are required by law to us

Parking in an EmergencyThe hazard warning lights should alwaysbe used when you stop on or near aroadway in an emergency.The hazard warning lights warn

Spare Tire and Tool StorageSpare tire and tools are stored in the locations illustrated in the diagram.JackSpare tireLong bolt for flat tireShort bolt

qJackTo remove the jack1. Open the trunk mat.2. Remove the jack container lid.3. Turn the wing bolt and jack screwcounterclockwise.Wing boltJack screw

qSpare TireYour Mazda has a temporary spare tire.The temporary spare tire is lighter andsmaller than a conventional tire, and isdesigned only for emer

To remove the spare tire1. Remove the trunk mat, and if a trunkboard is equipped remove it also.2. Turn the tire hold-down boltcounterclockwise using

NOTElMake sure the jack is well lubricated beforeusing it.(With Tire Pressure Monitoring System)lBe sure to register the tire pressure sensorID signal

2. Loosen the lug nuts by turning themcounterclockwise one turn each, but donot remove any lug nuts until the tirehas been raised off the ground.3. Pl

WARNINGUse only the front and rear jackingpositions recommended in this manual:Attempting to jack the vehicle inpositions other than thoserecommended

qLocking Lug NutsíIf your vehicle has optional antitheftwheel lug nuts, one on each wheel willlock the tires and you must use a specialkey to unlock t

3. Install the lug nuts with the bevelededge inward; tighten them by hand.WARNINGDo not apply oil or greas e to lug nutsand bolts and do not tighten t

WARNINGUse the correct size child-restraint system:For effective protection in vehicle accidents and sudden stops, a child must beproperly restrained

Bolt type Wheel sizeShort bolt 16-inch wheelLong bolt 17-inch wheel, 18-inch wheel7. Remove the tire blocks and store thetools and jack.8. Check the i

OverheatingIf the temperature gauge indicatesoverheating, the vehicle loses power, oryou hear a loud knockin g or pingingnoise, the engine is probably

2.5-liter engine3.7-liter engineIf you find no problems, the engine iscool, and no leaks are obvious:Carefully add coolant as required (page8-22).CAUT

Starting a Flooded EngineExcept 3.7-liter engineIf the engine fails to start, it may beflooded (excessive fuel in the engine).Follow this procedure:(W

Jump-StartingJump-starting is dangerous if done incorrectly. So follow the procedure carefully. If youfeel unsure about jump-starting, we strongly rec

Keep all flames, including cigarettes, and sparks away from open battery cells:Flames and sparks near open battery cells are dangerous. Hydrogen gas,

1. Make sure the booster battery is 12 Vand that its negative terminal isgrounded.2. If the booster battery is in anothervehicle, don't allow bot

Towing DescriptionWe recommend that towing be done onlyby an Authorized Mazda Dealer or acommercial tow-truck service.Proper lifting and towing are ne

Recreational TowingAn example of “recreational towing” istowing your vehicle behind a motorhome.The transaxle is not designed for towingthis vehicle o

8Maintenance and CareHow to keep your Mazda in top condition.Introduction ... ...

We want to help you get the most drivingpleasure from your vehicle. Your owner'smanual, when read from cover to cover,can do that in many ways.Il

Do not install a front-facing child-restraint system on the front passenger seat unlessit is unavoidable:In a collision, the force of a deploying air

IntroductionBe extremely careful and prevent injury to yourself and others or damage to your vehiclewhen using this manual for inspection and maintena

Scheduled Maintenance (USA, Canada, and Puerto Rico)Follow Schedule 1 if the vehicle is operated mainly where none of the followin g conditionsapply.l

qSchedule 1Maintenance IntervalNumber of months or kilometers (miles), whichever comes firstMonths 6 12 18 24 30 36 42 48×1000 km 12 24 36 48 60 72 84

Maintenance IntervalNumber of months or kilometers (miles), whichever comes firstMonths 6 12 18 24 30 36 42 48×1000 km 12 24 36 48 60 72 84 96×1000 mi

qSchedule 2Maintenance IntervalNumber of months or kilometers (miles), whichever comes firstMonths 4 8 12 16 20 24 28 32 36 40 44 48×1000 km 8 16 24 3

Maintenance IntervalNumber of months or kilometers (miles), whichever comes firstMonths 4 8 12 16 20 24 28 32 36 40 44 48×1000 km 8 16 24 32 40 48 56

Scheduled Maintenance (Mexico)Follow Schedule 1 if the vehicle is operated mainly where none of the followin g conditionsapply.lRepeated short-distanc

qSchedule 1Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 6 12 18 24 30 36 42 48 54 60 66 72×1000 km 10 20 30 40 50 6

Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 6 12 18 24 30 36 42 48 54 60 66 72×1000 km 10 20 30 40 50 60 70 80 90

qSchedule 2Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 3 6 9 12 15 18 21 24 27 30 33 36×1000 km 5 10 15 20 25 30 3

Do not allow a child or anyone to lean over or against the side window of a vehiclewith side and curtain air bags:It is da ngerous to allow anyone to

Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 3 6 9 12 15 18 21 24 27 30 33 36×1000 km 5 10 15 20 25 30 35 40 45 50

(Cont.)Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 39 42 45 48 51 54 57 60 63 66 69 72×1000 km 65 70 75 80 85 90 9

Maintenance IntervalNumber of months or kilometers, whichever comes firstMonths 39 42 45 48 51 54 57 60 63 66 69 72×1000 km 65 70 75 80 85 90 95 100 1

Owner Maintenance ScheduleThe owner or a qualified service technician should make these vehicle inspections at theindicated intervals to ensure safe a

Owner Maintenance PrecautionsImproper or incomplete service may result in problems. This section gives instructions onlyfor items that are easy to per

WARNINGDo not perform maintenance work if you lack sufficient knowledge and experience orthe proper tools and equipment to do the work. Have maintenan

Engine Compartment OverviewBrake/Clutch fluid reservoirBrake fluid reservoirPower steering fluid reservoirEngine coolant reservoirCooling system capEn

Engine OilNOTEChanging the engine oil should be done by anAuthorized Mazda Dealer.qRecommended OilUse SAE 0W-20 engine oil (2.5-literengine).Oil conta

The quality designation SM, or ILSACmust be on the label.0W-20120100806040200–2050403020100–10–20–30Use SAE 5W-20 engine oil (3.7-literengine).Oil con

The quality designation SM, or ILSACmust be on the label.5W-20120100806040200–2050403020100–10–20–30qInspecting Engine Oil Level1. Be sure the vehicle

Child-Restraint SystemInstallation PositionIn this owner's manual, explanation ofchild-restraint systems is provided for thefollowing three types

6. Make sure the O-ring on the dipstick ispositioned properly before reinsertingthe dipstick.Engine CoolantqInspecting Coolant LevelWARNINGDo not use

Inspect the antifreeze protection andcoolant level in the coolant reservoir atleast once a year―at the beginning of thewinter season―and before travel

Brake/Clutch FluidqInspecting Brake/Clutch Fluid LevelThe brakes and clutch draw fluid from thesame reservoir.Inspect the fluid level in the reservoir

Power Steering FluidqInspecting Power Steering FluidLevelCAUTIONTo avoid damage to the powersteering pump, don't operate thevehicle for long peri

Washer FluidqInspecting Washer Fluid LevelWARNINGUse only windshield washer fluid orplain water in the res ervoir:Using radiator antifreeze as washerf

Body LubricationAll moving points of the bod y, such asdoor and hood hinges and locks, shouldbe lubricated each time the engine oil ischanged. Use a n

qReplacing Windshield Wiper BladesWhen the wipers no longer clean well, theblades are probably worn or cracked.Replace them.CAUTIONTo prevent damage t

5. Remove the metal stiffeners from eachblade rubber and install them in thenew blade.CAUTIONØ Don't bend or discard thestiffeners. You need to u

BatteryWARNINGWash hands after handling the battery and related accessories:Battery posts, terminals and related accessories contain lead and lead com

qBattery MaintenanceTo get the best service from a battery:lKeep it securely mounted.lKeep the top clean and dry.lKeep terminals and connections clean

Installing Child-RestraintSystemsAccident statistics reveal that a child issafer in the rear seat. The front passenger'sseat is clearly the worst

qTire Inflation PressureWARNINGAlways inflate the tires to the correctpressure:Overinflation or underinflatio n oftires is dangerous. Adverse handling

NOTElAlways check tire pressure when tires arecold.lWarm tires normally exceed recommendedpressures. Don't release air from warm tiresto adjust t

qReplacing a TireWARNINGAlways use tires that are in goodcondition:Driving with worn tires is dangerous.Reduced braking, steering, andtraction could r

The temporary spare tire is easier tohandle because of its construction whichis lighter and smaller than a conventionaltire. This tire should be used

When replacing a wheel, make sure thenew one is the same as the original factorywheel in diameter, rim width, and offset(inset/outset).Proper tire bal

MEMO8-37Mazda6_8CD1-EA-11C_Edition1 Page435Wednesday, April 6 2011 11:6 AMForm No.8CD1-EA-11C

Light BulbsOverhead light/Map lights (Front)Headlights (High beam)Fog lightsHeadlights (Low beam)Front turn signal lights/ Parking lightsRear turn sig

WARNINGDo not replace the xenon fusion bulbsyourself:Replacing the xenon fusion bulbsyourself is dangerous. Because thexenon fusion bulbs require high

4. Turn the socket and bulb assembly toremove it. Carefully remove the bulbfrom its socket in the reflector bygently pulling it straight backward outo

4. Turn the cover counterclockwise andremove it.5. Detach the electrical connector fromthe bulb by pulling it to the rear.6. Unhoo k the bulb retainin

2. Secure the child-restraint system withthe lap portion of the lap/shoulder belt.See the manufacturer's instructions onthe child-restraint syste

3. Disconnect the electrical connectorfrom the bulb by pressing the tab onthe connector with your finger andpulling the connector downward.4. Turn the

4. Turn the socket and bulb assemblycounterclockwise and remove it.5. Disconnect the bulb from the socket.6. Install the new side turn signal unit int

6. Install the new bulb in the reverse orderof removal.Side turn signal lightsí, High-mountbrake light, Ground illuminationlightsíDue to the complexit

3. Disconnect the bulb from the socket.4. Install the new bulb in the reverse orderof removal.NOTETo replace the bulb, contact an AuthorizedMazda Deal

3. Disconnect the bulb from the socket.4. Install the new bulb in the reverse orderof removal.qReplacing Interior Light BulbsOverhead light/Map lights

Trunk light1. Press both sides of the lens cap toremove it.2. Disconnect the bulb by pulling it out.3. Install the new bulb in the reverse orderof rem

3. Pull the fuse straight out with the fusepuller provided on the fuse blocklocated in the engine compartment.4. Inspect the fuse and replace it if it

4. Install the right side of the fuse blockcover first as shown the figure.WARNINGDo not replace the main fuse byyourself. Have an Authorized MazdaDea

qFuse Panel DescriptionFuse block (Engine compartment)DESCRIPTIONFUSERATINGPROTECTED COMPONENT1 M.DEF 10 A Mirror defrosterí2 ST SIG 5 A Starter sig3

DESCRIPTIONFUSERATINGPROTECTED COMPONENT18 P.SEAT (D) 30 A Power seatí19 BTN 30 A For protection of various circuits20 IG KEY2 40 A Starting system21

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsyst

Fuse block (Passenger's side)DESCRIPTIONFUSERATINGPROTECTED COMPONENT1 P.WIND 30 A Power window2 METER IG 15 A For protection of various circuits

How to MinimizeEnvironmental Paint DamageThe paintwork on your Mazda representsthe latest technical developments incomposition and methods of applicat

qWater MarksOccurrenceRain, fog, dew, and even tap water cancontain harmful minerals such as salt andlime. If moisture containing theseminerals settle

Exterior CareFollow all label and container directionswhen using a chemical cleaner or polish.Read all warnings and cautions.qMaintaining the FinishWa

CAUTIONDo not use steel wool, abrasivecleaners, or strong detergentscontaining highly alkaline or causticagents on chrome-plated or anodizedaluminum p

2. Use a good grade of natural wax formetallic, mica, and solid colors.3. When waxing, coat evenly with thesponge supplied or a soft cloth.4. Wipe off

WARNINGDry wet brakes by driving very slowlyand applying the brakes lightly untilbrake performance is normal:Driving with wet brakes isdangerous. Incr

lHigh water temperature and high waterpressure car washers are availabledepending on the type of high pressurecar washer device. If the car washernozz

NOTElBecause genuine leather is a naturalmaterial, its surface is not uniform and itmay have natural scars, scratches, andwrinkles.lTo maintain the qu

qCleaning the Window InteriorsIf the windows become covered with anoily, greasy, or waxy film, clean themwith glass cleaner. Follow the directionson t

WARNINGAlways move the front passenger seatas far back as possib le if installing afront-facing child-restraint system on itis unavoidable:As your veh

8-62Mazda6_8CD1-EA-11C_Edition1 Page460Wednesday, April 6 2011 11:6 AMForm No.8CD1-EA-11C

9Customer Information and ReportingSafety DefectsImportant consumer information including warranties and add-on equipment.Customer Assistance ...

Customer Assistance (U.S.A.)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the k

2. Year and model of vehicle3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side

qCalifornia Customers1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/arbitration program administered by the Council of

7. California Civil Code Section 1793.2 (d) requires that, if Mazda or its representative isunable to repair a new motor vehicle to conform to the veh

Customer Assistance (Canada)qSatisfaction Review ProcessYour complete and permanent satisfaction is of primary concern to Ma zda. All AuthorizedMazda

Please recognize that the resolution of service problems in most cases requires the use ofyour Mazda dealer's service facilities, personnel and e

CAMVAP is fully implemented in all provinces and territories.Consumers wishing to obtain further information about the Program should contact theProvi

Customer Assistance (Puerto Rico)Your complete and permanent satisfaction is our business. That is why all AuthorizedMazda Dealers have the knowledge

3. Place the child-restraint system on theseat without putting your weight on theseat and fasten the seat belt. See themanufacturer's instruction

Customer Assistance (Mexico)Your complete and permanent satisfaction is our business. We are here to serve you. AllAuthorized Mazda Dealers have the k

2. Year and model of vehicle3. Vehicle Identification Number (17 digits, noted on your registration or title or located onthe upper driver's side

Importer/DistributorqU.S.A.Mazda North American Operations7755 Irvine Center DriveIrvine, CA 92618-2922 U.S.A.P.O. Box 19734Irvine, CA 92623-9734 U.S.

Triple J Saipan, Inc.(d.b.a. Triple J Motors)P.O. Box 500487 Saipan, MP 96950-0487TEL: (670) 234-7133/3051qAMERICAN SAMOAPolynesia Motors, Inc.P.O. Bo

Warranties for Your MazdalNew Vehicle Limited WarrantylDistributor Major Component Limited Warranty (Canada only)lSafety Restraint System Limited Warr

Outside the United StatesGovernment regulations in the United States require that automobiles meet specificemission regulations and safety standards.

Outside CanadaGovernment regulations in Canada require that automobiles meet specific emis sionregulations and safety regulations. Therefore, vehicles

Registering Your Vehicle in A Foreign Country (ExceptUnited States and Canada)Registering your vehicle in a foreign country may be problematic dependi

Add-On Non-Genuine Parts and AccessoriesNon-genuine parts and accessories for Mazda vehicles can be found in stores.These may fit your vehicle, but th

Cell Phones WarningWARNINGPlease comply with the legal regulations concerning the use of communicationequipment in vehicles in your State or Province:

WARNINGDo not seat a child in a child-restraintsystem on the front passenger seat ifthe front passenger air bagdeactivation indicator light does notil

Event Data RecorderThis vehicle is equipped with an event data recorder (EDR). The main purpose of an EDRis to record, in certain crash or near crash-

Uniform Tire Quality Grading System (UTQGS)This information relates to the tire grading system developed by the U.S. NationalHighway Traffic Safety Ad

WARNINGKeep your vehicle's tires properly inflated and not overloaded:Driving with improperly inflated or overloaded tires is dangerous. Excessiv

Tire LabelingFederal law requires tire manufacturers to place standardized information on the sidewall ofall tires. This information identifies and de

11. Max. load rating12. Tread wear, traction and temperature grades13. Max. permissible inflation pressure14. SAFETY WARNINGP215/65R15 95H is an examp

H“H” is the speed rating. The speed rating denotes the maximum speed for which the use ofthe tire is rated.Letter Rating Speed RatingQ 99 mphR 106 mph

Tread Wear, Traction and Temperature GradesTread wear: The tread wear grade is a comparative rating based on the wear rate of the tirewhen tested unde

qInformation on Temporary TiresPlease refer to the sample below.1. Temporary tires2. Nominal width of tire in millime ters3. Ratio of height to width

70“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.D“D” is the tire construction symbol. D indicates

Location of the Tire Label (Placard)You will find the tire label containing tire inflation pressure by tire size and other importantinformation on the

LATCH Child-Restraint SystemsYour Mazda is equipped with LATCH lower anc hors for attachment of specially designedLATCH child-restraint systems in the

WARNINGAlways check the tire inflation pressures on a regular basis according to therecommended tire inflation pressure on the tire label and in conju

qGlossary of TermsTire Placard: A label indicating the OE tire sizes, recommended inflation pressure, andthe maximum weight the vehicle can carry.Tire

Tire MaintenanceImproper or inadequate vehicle maintenance can cause tires to wear abnormally. Here aresome important maintenance points:qTire Inflati

qReplacing a TireWARNINGAlways use tires that are in good condition:Driving with worn tires is dangerous. Reduced braking, steering, and traction coul

CAUTIONIf you feel a sudde n vibration or ride disturbance while driving or you suspect yourtire or vehicle has been damaged, immediately reduce your

Vehicle LoadingWARNINGDo not tow a trailer with this vehicle:Towing a trailer with this vehicle is dangerous because it has not been designed totow a

Base Curb Weight is the weight of the vehicle including a full tank of fuel and allstandard equipment. It does not include passengers, cargo, or optio

SAMPLECARGOCargo Weight includes all weight added to the Base Curb Weight, including cargo andoptional equipment.The cargo weight limit decreases depe

Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg(849 lbs) for the “combination weight of occupants and cargo shou

SAMPLEWARNINGExceeding Axle Weight Rating Limits:Exceeding the Safety Certification Label axle weight rating limits is dangerous andcould result in de

Mazda6_8CD1-EA-11C_Edition1 Page5Wednesday, April 6 2011 11:3 AMForm No.8CD1-EA-11CTable of ContentsYour Vehicle at a GlanceInterior, exterior views a

qLATCH Child-Restraint SystemInstallation Procedure (RearOutboard Seats)1. Make sure the seatback is securelylatched by pushing it back until it isful

GCWGCW (Gross Comb ination Weight) is the weight of the loaded vehicle (GVW).GCWR (Gross Combination Weight Rating) is the maximum allowable weight of

Steps for Determining the Correct Load Limit:Steps for Determining Correct Load Limit:(1) Locate the statement “The combined weight of occupants and c

Reporting Safety Defects (U.S.A.)If you believe that your vehicle has a defect which could cause a crash or couldcause injury or death, you should imm

Reporting Safety Defects (Canada)Canadian customers who wish to report a safety-related defect to Transport Canada, DefectInvestigations and Recalls,

Service PublicationsFactory-authorized Mazda service publications are available for owners who wish to dosome of their own maintenance and repair.When

qNAVIGATION SYSTEM OWNER'S MANUAL:This booklet contains information regarding the proper operation and use of the navigationsystem. This is not a

9-46Mazda6_8CD1-EA-11C_Edition1 Page506Wednesday, April 6 2011 11:6 AMForm No.8CD1-EA-11C

10SpecificationsTechnical information about your Mazda.Identification Numbers ... 10-2Vehi

Vehicle Information LabelsqVehicle Identification NumberThe vehicle identification number legallyidentifies your vehicle. The number is ona plate atta

qVehicle Emission ControlInformation LabelqTire Pressure LabelqEngine Number2.5-liter engineForward3.7-liter engineForwardIdentification Numbers10-3Ma

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsyst

SpecificationsqEngineItemSpecification2.5-liter engine 3.7-liter engineType DOHC-16V in-line, 4-cylinder DOHC-24V 60°V, 6-cylinderBore×Stroke 89.0 × 1

qCapacities(Approximate Quantities)Item CapacityEngine oil2.5-literengineWith oil filterreplacement5.0 L (5.3 US qt. 4.4 Imp qt)Without oil filterrepl

qWeights2.5-liter engineManual transaxleItem WeightGVWR (Gross Vehicle Weight Rating) 1,969 kg (4,340 lb)GAWR (Gross Axle Weight Rating)Front 1,037 kg

qLight BulbsExterior lightLight bulbCategoryWattage ECE R (SAE)HeadlightsHigh beam 60 HB3 (#9005)LowbeamHalogen 55 H7 (H7)Xenonfusion35 D2S (D2S)Front

Check the tire pressure label for tire size and inflation pressure.Refer to Tire Inflation Pressure on page 8-32.Standard tireTire sizeInflation press

Personalization FeaturesThe following “Personalization Features” are available. These settings can only be changed by an AuthorizedMazda Dealer.Settin

Setting Function Initial Setting After Setting ChangeAdvanced keylessentryThe function to automatically lock the doorswhen leaving the vehicle while c

The following “Personalization Features” can be changed the vehicle owner.Setting Function Initial Setting After Setting ChangeWelcome sound Deactivat

10-12Mazda6_8CD1-EA-11C_Edition1 Page518Wednesday, April 6 2011 11:6 AMForm No.8CD1-EA-11C

11Index11-1Mazda6_8CD1-EA-11C_Edition1 Page519Wednesday, April 6 2011 11:6 AMForm No.8CD1-EA-11C

WARNINGUse the tether and tether anchor onlyfor a child-restraint system:Using the tether or tether anchor tosecure anything but a child-restraintsyst

AAccessory Socket ... 6-153Add-On Non-Genuine Parts andAccessories ... 9-18Advanced Key .

BBluetooth Hands-Free(Voice Recognition) ... 6-95Bluetooth Hands-Free cannot beused ...

DDynamic Stability Control (DSC) ... 5-25DSC OFF indicator light ... 5-26DSC OFF switch ... 5-26TCS/DSC indicator ligh

IIgnitionKeys ... 3-24Switch ... ... 5-2Illuminated Entry System ...

PPaint Damage ... 8-53Parking Brake ... 5-7Parking in an Emergency ...

SStorage Compartments ... 6-150Center console ... 6-151Glove compartment ... 6-150Overhead cons

WWarning Lights ... 5-44ABS ... 5-47Air bag system ...

Supplemental Restraint System (SRS) PrecautionsThe front and side supplemental restraint systems (SRS) include 6 air bags. Please verifythe air bags e

If your vehicle is also equipped with a driver and front passenger occupantclassification system, refer to the Driver and Front Passenger Occupant Cla

Never use a rear-facing child-restraint system in the front seat with an air bag thatcould deploy:Rear-facing child-restraint systems on the front sea

Do not attach objects on or around the area where a side air bag deploys:Attaching objects to the front seat in such a way as to cover the outboard si

Do not modify the suspension:Modifying the vehicle suspension is dangerous. If the vehicle's height or thesuspension is modified, the vehicle wil

Supplemental Restraint System ComponentsDriver/Front passenger inflators and air bagsCrash sensor, and diagnostic module (SAS unit)Front seat belt pre

How the SRS Air Bags WorkYour Mazda is equipped with the following types of SRS air bags. SRS air bags aredesigned to work together with the seat belt

Mazda6_8CD1-EA-11C_Edition1 Page6Wednesday, April 6 2011 11:3 AMForm No.8CD1-EA-11C

(With Driver and Front Passenger Occupant Classification System)In addition, the front passenger air bag is designed to only deploy in accordance with

qCurtain Air BagsThe curtain air bags are mounted in the front and rear window pillars, and the roof edgealong both sides.When the air bag crash senso

WARNINGNever tamper with the air bag/pretensioner systems and always have an AuthorizedMazda Dealer perform all servicing and repairs:Self-servicing o

SRS Air Bag Deployment CriteriaThis chart indicates the applicable SRS equipment that will deploy depending on the typeof collision.(The illustrations

Limitations to SRS Air BagIn severe collisions such as those described previously in “SRS Air Bag DeploymentCriteria”, the applicable SRS air bag equi

Roll-overEssential Safety EquipmentSRS Air Bags2-53Mazda6_8CD1-EA-11C_Edition1 Page65Wednesday, April 6 2011 11:3 AMForm No.8CD1-EA-11C

Driver and Front Passenger Occupant Classification SystemíFirst, please read “Supplemental Restraint System (SRS) Precautions” (page 2-41)carefully.NO

Front passenger air bag deactivation indicator lightThis indicator light illuminates to remind you that the front passenger front and side airbags and

WARNINGDo not decrease the total seated weight on the front passen ger seat:When an adult or large child sits on the front passenger seat, decreasing

Do not increase the total seated weight on the front passenger seat:When an infant or small child sits on the front passenger seat, increasing the tot

1Your Vehicle at a GlanceInterior, exterior views and part identification of your Mazda.Interior Overview ...

NOTElThe system requires about 10 seconds to alternate between turning the front passenger front andside air bags and seat belt pretensioner system on

Monitoring and MaintenanceqConstant MonitoringThe following components of the air bag systems are monitored by a diagnostic system:lCrash sensors, and

WARNINGDo not operate a vehicle with damaged air bag/seat belt pretensioner systemcomponents:Expended or damaged air bag/seat belt pretensioner system

3Knowing Your MazdaExplanation of basic operations and controls; opening/closing and adjustmentof various parts.Advanced Keyless Entry and Start Syste

Advanced KeysíThe advanced keyless functions (advanced keyless entry and start system) enable thefollowing operations while the advanced key is being

Lock buttonOperation indicator lightAuxiliary keyKey code number plateUnlock buttonTrunk buttonPanic buttonA code number is stamped on the plate attac

CAUTIONØ Because the advanced key uses low-intensity radio waves, it may not functioncorrectly under the following conditions:ØThe advanced key is car

qAdvanced Key MaintenanceCAUTIONØ Make sure the battery is installedwith the correct pole facingupward. Battery leakage couldoccur if it is not instal

3. Remove the battery by pressing itsedge.4. Install a new battery (CR2025 orequivalent) with the positive polefacing down.5. Close the cover.6. Reins

Operation Using AdvancedKeyless FunctionsqOperational RangeThe system operates only when the driveris in the vehicle or within operationalrange while

Interior Equipment (View A)Door-lock knob ... page 3-32

NOTElThe trunk is out of the operational range,however, starting the engine may bepossible.lThe engine may not start if the advancedkey is placed in t

To unlockDriver's door handleTo unlock the driver's door, touch thesensor area on the inside of the driver'sdoor handle. A beep sound w

lIt may require a few seconds for the doorsto unlock after touching the sensor area onthe inside of either front door handle.qOpening the Trunk Lid wi

OffThe power supply to electrical devicesturns off and the push button startindicator lights (ACC and ON) also turnoff.WARNINGBefore leaving the drive

NOTE(Manual transaxle)The starter will not operate if the clutch pedalis not depressed sufficiently.(Automatic transaxle)The starter will not operate

NOTElAfter starting the engine, the push buttonstart indicator lights (ACC and ON) turnoff and the ignition is in the ON position.lAfter pressing the

2. (Manual tran saxle)Shift into neutral.(Automatic transaxle)Shift the shift lever to the P position.3. Press the push button start to turn offthe en

Operation Using AdvancedKey FunctionsqKeyless Entry SystemThis system uses the more traditionalkeyless entry buttons to remotely lock andunlock the do

NOTElA beep sound can be heard for confirmationwhen the doors are locked using theadvanced keyless transmitter. If you prefer,the beep sound can be tu

Trunk buttonTo open the trunk, press and hold thetrunk button until the trunk lid opens.NOTETo open the trunk when the ignition is switchedto a positi

Interior Equipment (View B)Audio control switches ... page 6-71SRS

Declaration of ConformityKeyless entry system3-18Knowing Your MazdaAdvanced Keyless Entry and Start SystemMazda6_8CD1-EA-11C_Edition1 Page90Wednesday,

qAuxiliary Key FunctionUse the auxiliary key stored in theadvanced key in the event of a deadtransmitter battery or malfunction.Removing the auxiliary

Warning Lights and BeepSoundsqSystem Malfunction Warning LightIf any malfunction occurs in the advancedkeyless function, the KEY warning light(red) in

qRequest Switch InoperableWarning BeepIf the request switch for a front door ispressed under the following conditionswhile the advanced key is being c

qAdvanced Key Left-in-vehicleWarning BeepIf an advan ced key is left in the vehiclecabin and all the doors are locked using aseparate advanced key, a

When Warning Indicator/Beep is ActivatedUnder the following conditions, warning beeps are heard and a warning/indicator light inthe instrument cluster

KeysWARNINGDo not leave the key in your vehiclewith children and keep them in a placewhere your children will not find orplay with them:Leaving childr

Key extend/retract method (Retractabletype key)To extend the key, press the releasebutton.To retract the key, rotate it into the holderwhile pressing

qTransmitterLock buttonUnlock buttonTrunk buttonPanic buttonOperation indicator lightThe operation indicator light flashes whenthe buttons are pressed

NOTE(Without theft-deterrent system)The hazard warning lights will flash twice toindicate that all doors are unlocked.(With theft-deterrent system)The