Mazda MAZDA6 Owner's Manual download pdf (Page 249)

100

101

Black plate (249,1)

WARNING

Always turn off the cruise control

function when it is not in use:

Leaving the cruise control function

turned on when it is not in use is

dangerous as it could operate

unexpectedly, resulting in an

accident.

How to set the speed

Adjust the system to the desired vehicle

speed using the accelerator pedal.

Cruise control function begins when the

SET

or SET switch is pressed.

NOTE

The system may not be able to maintain the

set speed constantly depending on driving

conditions such as steep up or down slopes.

The speed will continue increasing while

the SET

switch is pressed and held. The

speed will continue decreasing while the

SET

switch is pressed and held.

How to increase the set speed

The set speed can be increased using the

following operations:

To increase speed using the SET

switch

Press and hold the SET

switch and

release the switch at the desir ed speed.

The set speed can be adjusted

incrementally (1 km/h (1 mph)

increments) by pressing the switch and

releasing it immediately. For example, if

the switch is pressed 4 times, the set speed

increases by about 4 km/h (4 mph).

To increase speed using accelerator

pedal

Depress the accelerator pedal and press

the SET

or SET switch at the

desired speed.

If the switch is not operated, the system

returns to the set speed after you release

your foot from the accelerator pedal.

How to Decrease the Set Speed

Press the SET

switch continuously and

release the switch at the desir ed speed.

The set speed can be adjusted

incrementally (1 km/h (1 mph)

increments) by pressing the switch and

releasing it immediately. For example, if

the switch is pressed 4 times, the set

vehicle speed decreases by about 4 km/h

(4 mph).

Cancelling the function

Cancelling using OFF switch

When the OFF switch is pressed, the

cruise control function is cancelled.

Cancelling using ON switch

When the ON switch is pressed

continuously for about 2 seconds, the

cruise control function is canceled and the

headway control function is made

available for operation.

The cruis e control function is canceled

automatically in the following cases. If the

RESUME switch is pressed while the

vehicle speed is 25 km/h (16 mph) or

higher, the speed returns to the original set

speed.

The CAN CEL switch is pressed.

The brake pedal is depressed.

The parking brake is applied.

The selector lever is shifted to P or N

position.

When Driving

i-ACTIVSENSE

4-125

Mazda6_8EA2-EA-14K_Edition1 Page249

Thursday, October 16 2014 10:58 AM

Form No.8EA2-EA-14K

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 613 614

Comments to this Manuals

No comments

Mazda MAZDA6 Owner's Manual Page 249

Comments to this Manuals

Related products and manuals for Cars Mazda MAZDA6