Mazda CX-9 Owner's Manual download pdf (Page 63)

Black plate (63,1)

qLATCH Child-Restraint System

Installation Procedure (Second-

Row Outboard Seats)

1. Slide the second-row seat as far back as

possible.

2. Make sure the seatback is securely

latched by pushing it back until it is

fully locked.

3. Expand the area between the seat

bottom and the seatback slightly to

verify the locations of the LATCH

lower anchors.

For rear

right seat

For rear

left seat

NOTE

The markings above the LATCH lower anchors

indicate the locations of LATCH lower

anchors for the attachment of a child-restraint

system.

4. Raise the head restraint to the top

locked position.

Refer to Head Restraints on page 2-15.

5. Secure the child-restraint system using

BOTH LATCH lower anchors,

following the child-restraint system

manufacturer's instruction. Pull on the

child-restraint to be sure both anchors

are engaged.

6. If your child-restraint system came

equipped with a tether, that means it is

very important to properly secure the

tether for child safety. Please carefully

follow the child-restraint system

manufacturer's instructions when

installing tethers.

Anchor bracket location

Tether strap position

Tether strap

Forward

Essential Safety Equipment

Child Restraint

2-51

CX-9_8CA8-EA-11G_Edition1 Page63

Thursday, June 23 2011 11:3 AM

Form No.8CA8-EA-11G

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 603 604

Comments to this Manuals

No comments