Mazda 2009 6 User Manual download pdf (Page 19)

Black plate (19,1)

l

Operation using the advanced key/

retractable type key

Programmed seat positions can activated

using the following functions:

l

Programming buttons 1, 2, or 3.

l

Operation using advanced keyless

functions/keyless entry system

NOTE

Individual seat positions can be programmed

to the three available programming buttons on

the side of the driver's seat, plus one seat

position for each advanced key/retractable

type key used with the vehicle.

Operation using the seat-side buttons

Programming

Park the vehicle in a safe location before

performing the seat position

programming. (Vehicle must be stopped)

1. Adjust the seat to the desired position.

For each seat position adjustment

method refer to the following pages:

Seat Slide (page 2-5)

Seat Recline (page 2-5)

Height Adjustment (page 2-6)

2. Press the desired programming button

1, 2, or 3 while pressing the set button

until a beep sound is heard.

The button is programmed after a beep

sound is heard. Other buttons can be

programmed using the same procedure.

NOTE

Vehicle maintenance or other reasons

requiring the vehicle battery to be

disconnected will result in the seat position

memory being erased.

In this case, re-program the seat positions.

Setting the driver's seat to a pre-

programmed position

There are two methods for setting the

driver's seat to a pre-programmed

position. For example, the type A method

can be used before sitting in the seat and

while the driver's door is open, and the

type B method can be used after getting in

the vehicle with the driver's door closed.

TYPE A

When the ignition switched off and the

driver's door is open, press the

programming button 1, 2, or 3 for the

desired seating position.

NOTE

In the following cases, the seat position set

function cancels:

l

Any of the seat adjustment switches are

operated.

l

The set switch is pressed.

l

A programming button 1, 2, or 3 is pressed.

l

The vehicle starts moving.

l

Vehicle locking/unlocking is done using the

transmitter.

l

Vehicle unlocking is done by pressing the

request switch on a front door while the

advanced key is being carried.

l

Vehicle unlocking is done by touching the

sensor area on the backside of the front

door handle while the advanced key is

being carried.

TYPE B

When the ignition is switched ON or the

driver's door is closed, press and hold the

desired programming button 1, 2, or 3.

Essential Safety Equipment

Seats

2-7

Mazda6_8Z64-EA-08H_Edition1 Page19

Wednesday, June 25 2008 10:3 AM

Form No.8Z64-EA-08H

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 463 464

Comments to this Manuals

No comments