Mazda 2002 Tribute Specifications download pdf (Page 237)

The transmission fluid should be in

the crosshatch zone if at normal

operating temperature (66°C-77°C

[150°F-170°F]).

High fluid level

Fluid levels above the

crosshatch zone may result in

transaxle failure. An overfill

condition of transmission fluid

may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transaxle component damage.

If necessary, add fluid in 250 mL (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Maintenance and Specifications

237

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 255 256

No comments

Mazda 2002 Tribute Specifications Page 237